Jump to content
SAU Community

Recommended Posts

I've seen a few people discuss this in the past but couldn't find any specific threads on it. I decided to try it myself the other day and it works!

Basically what you need is a IBM PS/2 (as opposed to Sony) keyboard or mouse extension cable. Generally speaking the shorter the better to save space. They generally cost under $10 from most computer parts shops or Jaycar. I got the shortest one I could find, which was 1.8m.

You have to modify the cable though to get it to fit. Here are the steps outlined briefly for anyone wanting to do this themselves.

1. Cut one of the pins off. I can't remember which one it is off the top of my head but you are best off confirming it via your Commander rather than relying on my info anyway. Use a pair of fine nosed pliers and bend the pin back and forth until it snaps off at the base. Be very careful not to bend the adjacent pins, but when I did it I found it pretty easy to avoid bending the others.

2. This step is much trickier and is more of a hack job than the first step. You have to shave down the plastic post in the middle so it will fit in the PowerFC socket. I tried a variety of methods and I seemed to need a combination of everything to get it just right. First I used a pair of wire cutters to snip off a bit of the top and bottom, but I couldn't get it all the way to the base and it left some plastic dags on the post. I then used a modelling knife and a pair of small scissors to shave off the dags as best I could. This still left it wider at the base than at the top, but it was narrow enough to fit into the socket.

3. Plug the cable into the PowerFC, and the Commander into the cable. Turn the key to "on" and the Commander should light up as normal. If it works, then put everything back together and coil up the excess cable between the ECU and the guard. That's my recommendation only, you can run it wherever you like. Once it's there, the tip of the cable can be poked up under the panel above the kick panel and to the left of the glovebox and it's not visible at all. You can then reach up and pull the cable out whenever needed.

If anyone's still wondering what the point of this is, it's to make the Commander much easier to remove from the car when needed. Like when you're dropping off your car to a mechanic or auto electrician for repairs/maintenance and you don't want it stolen, just unplug it from the more easily accessible cable and take it with you.

Also you can stop the apprentices from taking your car for a hoon. When you get to the workshop, change your redline to 3500rpm or so which will leave the car drivable for road tests, then unplug the Commander and take it with you. Of course it's not foolproof (ie, if they have their own Commander), but it does greatly increase your chances of your car not being wrtten off by teenage test pilots.

Of course you can do both of the above things anyway, but it's much more difficult reaching up to the top of the PowerFC directly. The extra cable makes it much easier.

Link to comment
https://www.sau.com.au/forums/topic/31837-powerfc-extension-lead/
Share on other sites

Good work Jim.

I have done this myself and actually have rigged up a PS2 socket in a din plate next to some gauges for easy/neat plugging and unplugging of the FC Commander. 2 x 50mm guages and a FC commander port in a DIN.

To build it i found a mini DIN/PS2 connector scavenged out of an old PC case and wired up a harness to a PS2 extention cable I hacked.

Now im looking to get some small Apexi decal made to surround the port and finish the job. Ill take some photos when its finished and in the car.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...