Jump to content
SAU Community

Recommended Posts

All,

Dave from moto concepts has asked for my to try and organise another skid pan Day on Sat 27th March. After the 20 + no shows at the last day the following format will be tried.

Both pans again, the large skid pan and the figure 8, we will have 2 instructors.

Early morning, one person on a pan at a time so you can get confidence in your car and the track. After this double shoot outs with chase time on the figure 8.

You will get heaps of pan time and do around a tank of juice. There will be little wear on your car as you dont get much over 80km/hr, and your tyres will skid most of the day do wear will be nothing over the day.

The cost

35 Cars on the day, $75 deposit needed for non members $50 for members

$150 per car 35 names max,

$50 per additional driver,

$10 per passenger (Wrist bands to be used to ensure on driving

I will need a $75 deposit for non members and $50 for members

Deposits are transferable to other drivers if you cant make it, the focus is on ensuring numbers not to take your money.

I will assume 5 drop outs on the day so 30 people for the day will be comfortable.

Any questions please let me know.

Thanks OZ

Link to comment
https://www.sau.com.au/forums/topic/31869-skid-pan-ec-sat-27th-march-04/
Share on other sites

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Guys: just a reminder. There's an election on the 27th march and you have to vote IN YOUR ELECTORATE (there are no absent-t votes...). If you won't be in your electorate that day, ring your council and get a postal vote application sent out.

Just thought i'd better remind you when i saw the date.

Cheers,

Dave.

COUNCIL elections mate... tht's just the way they are... it's basically to save A LOT of time for eletoral emplyees... saves a lot of excess work, excess counting and excess preperation...

I work for the electoral office and i can tell you, you have no idea how much extra work there'd be if it where any other way....



  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG has not responded to my emails so far since purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...