Jump to content
SAU Community

I detailed my engine bay ...

predator

By predator,
in Queensland

 Share

Recommended Posts

predator Grand Master

predator

Posted
  • Author
Posted

um, hoses are a mixture..Some are silicon (the best stuff), which isn't cheap. The other is just some stuff that was available in red. Its water hose, which means its even stronger than needed for vacuum hoses.

All the hoses i got in melb at a place called Purple Pig (specialising in hoses). Not sure whether they have it up here.

I think i remember seeing some silicon hose kits in Autobahn for about $40. Another option.

Whats involved in doing the cam covers/rocker cover? how many time do u need to sand and polish it to come out nice?

You have to take them off. That involves getting the cover off, and then under there is the screws for the other sides. Take them off, put them on newspaper and start going. You'll need some heavy wet and dry sandpaper to start off with (120 grade or so) and then gradually move to finer and finer stuff (1000) to get the really shiny finish. Autosol is a metal polishing cream which also helps inbetween sands (autobahn, supercheap, kmart, etc).

You can also take it to a metal polishing place, that can do it for you, and probably give better results than by hand.

Bobjones Mentor

Bobjones

Posted
Posted

You could always try Tony Powell plumbing supplies at Geebung, he usually has alot of good plumbing stuff and other pipes...

Also on the notion of polishing...

I did the rocker cover on my SR20DE, all you need is some 600 sand paper, then go 800, 1000, 1200 wet and dry and wet is the best option, then get a polishing kit from Bunnings that attaches to a drill ($30) and some rags and of course wax and grease remover and finally some metal polish...brasso everyone seems to have here...

Took a while cause I was drinking...but came up better than a mate who paid $120 to get his done "professionally"

Looking at doing the line's covers one day...

  • 1 month later...
predator Grand Master

predator

Posted
  • Author
Posted

Rocker Covers aren't so easy to get off. If you have changed the spark plugs before you'll probably know most of the stuff you need to get off to get to them. Its mainly just getting the intake piping and things like that out of the way.

You can probably see the outside screws. The inside screws are in the plastic cover. Once you undo them all they just lift off. I don't believe you need a torque wrench for the cam covers to put back on - i definitely didn't use one. You shouldn't have to replace the rocker cover gaskets unless you somehow damage them while removing the cover.

So really its just a disassembly process. It took me I guess 30-40 mins to get them off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      R33 GTR running -9 with no tune

      By Duncan · Posted

      Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Duncan
      Coolant leak?

      By Duncan · Posted

      Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      I'd ask the shop what they used and use that. Mixing coolants is sometimes OK, sometimes not, and you have know the details of each coolant to know whether it's a good idea or not.
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
×
×
  • Create New...