Jump to content
SAU Community

Recommended Posts

I would not mind if petrol was a fixed price. Say $1.40. But....

Today I filled up one car, drove home got the Stag and drove back, like 10 mins, the price had gone up 5 cents.

Now I reckon someone out there with some political ambitions could start a new political party. The "People's Petrol Pricing Party". Run a candidate in each State for the Federal Senate. Each interested motorist could donate $5, say X 1,000,000.

That would pay for a jolly good campaign. Get CONTROL of the Upper House. Then stick it to the Oil Companies and the Government of the day.

A while back there was a sign on a bowser, "Not paying for petrol is stealing" Some sage had written underneath, "So is a

$1.65 a litre.

Edited by 66yostagea
Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/
Share on other sites

  • Replies 62
  • Created
  • Last Reply

Top Posters In This Topic

yesterday morning..$1.18 per ltr for regular fuel.. same place that night was $1.38 per ltr.. i got home, went to my local servo and it was $1.19 so i topped up the gf's car... its crazy that it can jump 20c in less than one working day!!

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5209480
Share on other sites

yesterday morning..$1.18 per ltr for regular fuel.. same place that night was $1.38 per ltr.. i got home, went to my local servo and it was $1.19 so i topped up the gf's car... its crazy that it can jump 20c in less than one working day!!

i noticed the same at the place i go and was wondering the exact same thing, its fkn bullshit...

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5209578
Share on other sites

Yes, but if the price of fuel was fixed for say three months, based on the average PPB for the preceeding three months, there would be no b'sit prices for Wednesday to Friday then a 5 to 20c increase for the weekends, especially long weeks and holidays.

The oil that comes out of the ground today would not hit the refineries for three months so averaging would be fair.

But pricing of petrol must be set by a strong organisation, hence the political aspect.The present "referee' is a toothless tiger. Prices are still set by the oil companies to satisfy their own monetary needs. And also, the tax barrel.

There is a multitude of factors to consider to this end you have to have people who are incorruptable, virtually like judges,

although there have been some bad apples in that barrel.

There may be a career path for the more astute among us?

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5210015
Share on other sites

the price of bp ultimate (only 98ron fuel available) in tas has been over $1.50 for a while now, and i know for a fact that there are about 6 or 7 stag owners down here, myself included, who have been running 95 with no problems

i know everyone will get up me saying that its bad for the motor etc etc but i've been running it for probably 2 months now and i haven't really noticed a difference in performance and 80% of the time i'm just cruising about

i guess 10 years ago 95 ron was still pretty average and nowadays the fuel quality is a bit higher, coupled to the fact that the engine management is pretty advanced for a 10 y/o car and is detecting the higher knock and dealing with it - oh and tassie is colder than back home in qld so less change of pinging too

but back onto the topic of fuel, if you guys think your getting ripped, down here there is not much fluctuation its been $1.299 for ages for regular unleaded and bp ultimate goes for about 21 cents more per litre than regular

and it also annoys me that when the price per barrel goes down the price of fuel does not

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5210101
Share on other sites

from what i've seen, petrol is still inline with the weekly cycle. petrol in adelaide is cheaper than brisbane though. i'm still 100% certain that petrol in the lower socioeconomic areas is cheaper than the higher socioeconomic areas though. i've seen differences in the expensive parts of the cycle, at 5cpl. that's for both brisbane and adelaide.

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5210470
Share on other sites

Josh, I really dont think the socio/economic thing has much to do with it. If you are short of fuel just drive to the cheaper outlets and fill a few drums while you are at it. If fuel is dear up here I will just top up to get down the coast. It is a bit like grocery shopping. I do the shopping here caus Mrs66 works in our Gallery every day. I only buy what is on special. I dont need to, I do it caus I want to.

But this digresses from what is the motorists lament. $xxx is STEALING.

In the US they pay less per Gallon(US) than we do a litre.

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5210584
Share on other sites

Once upon a time there was this big island, well away from all the other oil producing countries. They had this real dumb government running the show, but that didnt matter the country prospered anyway.

They had all the natural reserves of oil and gas they could ever need. The problem was how do we get it out of the ground? That would call for investment and infrastructure, most likely requiring govt initiatives....all seemed a bit too hard. Only every other developed country was doing it, but seemed to hard for the Aussie govt.

So, it was decided the smart thing to do would be to sign over all the oil to foreign producers with the agreement that they supply the local market, but to make it worthwhile they can also export the oil, and the Australian people will pay global prices for barrels of oil, (a higher price)

I think that was some of the greatest governance ever by a political party!

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5211052
Share on other sites

Josh, I really dont think the socio/economic thing has much to do with it. If you are short of fuel just drive to the cheaper outlets and fill a few drums while you are at it. If fuel is dear up here I will just top up to get down the coast. It is a bit like grocery shopping. I do the shopping here caus Mrs66 works in our Gallery every day. I only buy what is on special. I dont need to, I do it caus I want to.

But this digresses from what is the motorists lament. $xxx is STEALING.

In the US they pay less per Gallon(US) than we do a litre.

it could be just be the regions themselves, because in qld i only tested this stretch, but it was consistent. go from the Buranda area, to mt gravatt and it'll drop a cent. then go to woodridge, it'll drop another 2 cents, then go to browns plains and it will drop another cent or 2. originally i thought it was just because it's further out of town (like that would somehow make a difference), but then if you go to redland bay, it's usually at least as expensive as buranda area or moreso...

it sounds a little strange, i know, but for about 2 years, i worked between those places consistently and i always filled up at browns plains. ipswich is usually on par, or a little cheaper than browns plains as well.

but yeah, we get shafted by comparison to the us. but then new zealand gets shafted compared to us and europe gets shafted compared to them.

Edited by pyro-ns
Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5211083
Share on other sites

£1.26 per litre here in Nottingham England for Shell V-power.

I think that's roughly $2.06 per litre.

Yes , My arse is sore every time i go to fill up.

Damned if im getting rid of my car though.

Most of that is tax and will the government do anything about it ?

Will they f**k.

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5211138
Share on other sites

hahahahaha, you just made me think. when the 10% ethanol blend came to QLD, the servo that i was working at was one of the first 6 or so to get it. the price was the same for the ethanol blend as it was for regular 91 unblended. a customer came in one day and said, "Isn't there meant to be no tax on the ethanol blend, so it should be about 8c cheaper?" i had to stifle my laughter and tell him that government tax is somewhat higher than 8cpl.

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5211705
Share on other sites

hahahahaha, you just made me think. when the 10% ethanol blend came to QLD, the servo that i was working at was one of the first 6 or so to get it. the price was the same for the ethanol blend as it was for regular 91 unblended. a customer came in one day and said, "Isn't there meant to be no tax on the ethanol blend, so it should be about 8c cheaper?" i had to stifle my laughter and tell him that government tax is somewhat higher than 8cpl.

Yes, on petrol.... but if it is 10% ethanol, shouldn't there only be tax on the petrol content of the fuel ie 90%? Not that the tax on 10% would equate to 8c/L, but I can understand through the double negative what he was saying.

Link to comment
https://www.sau.com.au/forums/topic/318838-petrol-prices/#findComment-5211762
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...