Jump to content
SAU Community

Recommended Posts

Another option is to try Greg from GSL RallySport.

He is a trader on this forum in the Classifieds section.

He sells QFM pads quick return via post. A1RM for high performance odd track day use (I use these on my car) and HPX street use only.

They are excellent value for money and work great. See his posts for specs.

Might want to check if the 350z touring brakes are the same as the V35 non brembos.. could widen your options..

Nope they're not.

Well they weren't on my 05 auto anyway. Found that out after ordering pads, taking the day off, car on hoist callipers off and oh-oh :thumbsup:

Had a look into it cause i def remember that Z pads would not fit my non brembo 05 coupe callipers.

Here's what i found

03/04 V35 Non Brembo = 03-05 Z33 non Bremno

05-07 V35 Non Brembo = 06-07 Z33 non Brembo

So double check but in my case looks like the 1 year overlap screwed me back when i was looking cause i do remember asking for 05 Z33 pads as my V35 was an 05.

can someone confirm this...

i got quotes from nissan dealer, 350z 2003 with brembo brakes.

front pads are; dealer 1 $510 dealer 2 $600+

rear pads are; dealer 1 $348 dealer 2 $580

anyway pm sent to rianto!

Hey guys,

Ended up going with Greg from GSL rally sport up in QLD. Very good prices and free overnight shipping which is a very handy plus.

Now to find somewhere to get them fitted. Getting quoted ridiculous prices around brookvale/northern beaches.

Anyone have a good contact in that area?

Thanks

Hey guys,

Ended up going with Greg from GSL rally sport up in QLD. Very good prices and free overnight shipping which is a very handy plus.

Now to find somewhere to get them fitted. Getting quoted ridiculous prices around brookvale/northern beaches.

Anyone have a good contact in that area?

Thanks

Do em urself mate.

Ive not done mine yet, but if they are as easy as any other car or bike, they are piss easy.

Im sure someone has done a guide on G35driver or something lol

DIY!!!....i did both the front and rear myself, took my time and made sure everything was perfect, plus saved nearly $250 bucks!. There are comprehensive DIY video on changing pads for the G35 on youtube!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...