Jump to content
SAU Community

Ems Motorsport Ecu R32 Gtr T78

zr200

By zr200,
in Engines & Forced Induction

 Share

Recommended Posts

zr200 Enthusiast

zr200

Posted
Posted

anyone know where the best place to get my r32 gtr dyno tuned on the gold coast or brisbane?

it has an EMS motorsport ecu, i know nothing about it cause i just bought it.

any help would be great as i am going through plugs very quickly cause it has a race tune at the moment.

cheers

Link to comment
https://www.sau.com.au/forums/topic/319308-ems-motorsport-ecu-r32-gtr-t78/
Share on other sites
STATUS Grand Master

STATUS

Posted
Posted
EMS is a pain in the ass which i found out the hard way on the M3 - there was only 2 or 3 workshops willing to do anything with it and i had to pay through the ass for them to do it.

Yeah depends on the model, we do a fair few but the base models are real coarse and mega basic.

STATUS Grand Master

STATUS

Posted
Posted
it is an EMS sequential motorsport ecu 8860.

That ecu should be ok once tuned correctly, ring EMS and find who they recommend to tune that particular ecu in your area. There is a big difference between some one who sells them and who actually is the best tuner and ems will point you in the right direction. That said the upper ranges of EMS are capable units and easy to tune.

How far from mercury are you? http://www.mercurymotorsport.com.au/

zr200 Enthusiast

zr200

Posted
  • Author
Posted
That ecu should be ok once tuned correctly, ring EMS and find who they recommend to tune that particular ecu in your area. There is a big difference between some one who sells them and who actually is the best tuner and ems will point you in the right direction. That said the upper ranges of EMS are capable units and easy to tune.

How far from mercury are you? http://www.mercurymotorsport.com.au/

were are they?

i am in north east nsw or about an hour south of the gold coast

STATUS Grand Master

STATUS

Posted
Posted

Trent (confusing as im Trent) is on here, would be worth getting in touch. im sure they have a trader section on here too.

http://www.skylinesaustralia.com/forums/Me...port-m3999.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...