Jump to content
SAU Community

Recommended Posts

I'm looking to import a V35 Coupe and was wondering what peoples thoughts are on insurance, and for that matter what options are available. There are, I think, four stages to potentially cover before you can obtain normal car insurance;

  1. From purchase (auction, dealer) to port / loading on ship.
  2. Shipping from Japan to Australia.
  3. Unloading / storing at Aussie port.
  4. Picking up and delivering to Compliance / Home (this step could possibly be covered by normal car insurance? Although the car would not be roadworthy at this point)

Is it possible to insure end to end? Do people normally bother or do most just wear the risk?

What would you do?

Link to comment
https://www.sau.com.au/forums/topic/319448-insurance-shipping-handling/
Share on other sites

If you're importing through a broker, they should be able to help you with the first 2.

For 3 and 4 you may be able to get something like laid up insurance. I know Shannons do it for their custs. Pretty much covers the car while being stored and transported on the back of a truck.

No one will cover you though will its unregistered if its being driven on the road. Not that i could find anyway. I actually drove mine from the compliance place to home to RTA which you can do, just can't remember having insurance for it whilst doing that.

I'm looking to import a V35 Coupe and was wondering what peoples thoughts are on insurance, and for that matter what options are available. There are, I think, four stages to potentially cover before you can obtain normal car insurance;

  1. From purchase (auction, dealer) to port / loading on ship.
  2. Shipping from Japan to Australia.
  3. Unloading / storing at Aussie port.
  4. Picking up and delivering to Compliance / Home (this step could possibly be covered by normal car insurance? Although the car would not be roadworthy at this point)

Is it possible to insure end to end? Do people normally bother or do most just wear the risk?

What would you do?

1, never done it, never needed it and not sure it's actually possible at all. I've never heard of it.

2, I used to do it, now I just use good shipping companies instead and never have a problem. if the car is super duper special I'd spend the extra money on putting it in a container rather than buying some dodgy insurance. prevention is far better than the cure. I'd much rather make sure nothing happens to the car up front (as best I can) than have to bother with insurance claims down the track.

3, same as above. the car is unloaded and will be at the port for a couple of days only. it's secure in there and nothing will happen. not worth it.

4, for this one I would get regular comprehensive insurance. tell the company you've bought a new car and it will be in your possession as of XX date but is not yet registered. it shouldn't be a problem, just give them the chassis number.

end to end I've never heard of anyone who has insured a car from the moment it was purchased at auction right through to it being complied and registered in aus. it certainly doesn't keep me awake at night....

edit: dude! just saw you are buying a V35 coupe. seriously it's not worth it. it's a car that costs a bit over $10K to buy. waste of money insuring that or putting it in a container. seriously even for cars $100K+ carefully monitored, regular roro shipping process is fine.

You probably cant get insurance for the car from the auction to the port, but at each stage, when the car changes hands, the car is checked over, and your customs agent in Japan should be able to trace that sort of stuff if something major happened. Same in Aus as well.

Shipping with Kiwi, all cars are insured but doesnt include inner cargo.

I was personally really worried about the process, but after doing it twice now, I havent really had much to worry about. I have heard of horror stories though. You can expect minor things to be taken, I had my gear knob pinched on my first car. And on my Legacy, someone has replaced the rear view mirror with a different one. Quite funny actually, and I prefer the one they put on :yes:

Guess I won't bother with insurance during transport then, but what if the ship sinks?!

And, when it arrives in Australia I should be able to get it covered by normal car insurance.

To get from the dock to wherever, I believe I can get a temporary permit to drive the car from one location to another (did this with an unlicensed motorbike from local auction recently), is that what most do? I'm guessing I can just drive it home if I need to wait for compliance, then get another permit to drive it to compliance, then home or the pits for licensing. Is there a limit on the number of permits you can get?

hey Insurey McInsurance. what's with you and insurance?

what if the ship sinks? really?

very very remote chance of that happening... there is higher chance of the ship being boarded by pirates and hijacked

if the ship sinks you will most likely loose the car and you will be required to pay a share of the salvage cost. you can insure against that salvage cost liability. it's called general average insurance. personally I think it's a waste of time. if it worries you then look into it. it does occasionally happen. a business partner in japan has had a ship sink that he had some cars on. not nice. but that's the only one I know of personally. of the thousands and thousands of voyages per yer carrying cars I would say less than 1 sink.

If you really want piece of mind, then do it. Its not expensive.

As an example i last used Associated Marine Insurance who are underwriters for Zurich i think. Cost was $230 for $23000 car. Was a 2yr old V35 at the time. If the car is worth less, the premium will come down.

Easy process, get photos of the car before it boards and pay your premium once they give you the quote.

so yeah if no insurance means no sleep, just do it :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That R31 was so cool. Only did Orange Park once. Scared the hell out of me.
    • Selling my TE37SLs since I've switched to smaller wheels.  They're for sale in Japan but it's pretty simple to send them overseas; USA excluded, since JPPost isn't sending there at the moment. Specs Front: 18x9.5j +22 5x114 Rear: 18x10j +20 5x114 Price: 320,000 JPY/ 3,285 AUD (current FX rate) Condition: a few scratches here and there, no bends, distortions or cracks.  Tires will not be included for international buyers, I'll get them dismounted before shipping. They're currently listed on yahoo auction and will be shipped in Japan with the tires if they sell here. Shipping costs to Aus: EMS (1-2 weeks): AUD 1,175 (current FX rate) Sea (2 months): AUD 460  (current FX rate)
    • The alloy coolant reservoir has a sight glass, so as long as I can see coolant in the sight glass it's GTG, as for PS, it isn't anything catastrophic if it gets low, and as it hasn't lost a drop since I have owned the car I cannot see it being an issue, even after putting the "big block" 2.5 in....LOL The only time it gets slightly messy is at oil changes, as the oil filter sits above the frame, and I need to use a plastic bottle with its bottom cut off to catch the flow when loosening the filter
    • Good on you for taking on the job, but it is a big one. Even if you have bolt on manifold and turbo, you will need: Post throttle pressure source to boost controller to wastegate (and FPR, and ECU/MAP sensor) Pre throttle pressure source to top of BOV(s) Oil feed - you can take that from the standard port in the middle of the block Oil return to block under the turbo - this is much trickier than it seems to route a decent/wide pipe past the manifold. You really can't use rubber hose because it is way too hot there, and also the oil out of the turbo core is a bit frothy so it needs to have a decent diameter Water feed - you can take that from the standard port in the rear of the block. Water return - mine runs to a T into the heater box return, just make sure you don't create a high point making bleeding hard. All of those lines should use 200 series style teflon braided hose with heat shielding because everything needs to be routed past the manifold. Also a turbo beanie is a really good idea to minimise the chance of the car catching fire (under bonnet lining in particular) You also need to decide a cam cover breathing solution as well, will you vent externally via a catch can (probably illegal) or return to the intake (plumbing required and can oil up everything over time) Keep in mind the intake and exhaust piping in the engine bay will be custom so you either need to be able to fab ally and steel or have someone you can get a car that isn't running to. Get the wideband fitting welded into the dump pipe at the same time. Also, just my opinion, a screamer pipe attracts attention and doesn't add power, I'd plumb it back if you want to be allowed to keep the car on the road. BTW do you know anything about how healthy the motor is, and what power you are targeting? Doubling or tripling the factory power on an unknown motor is a little risky. Also fuel system will need some attention (pumps, high current hanger, direct power and earth feed, injectors etc)
×
×
  • Create New...