Jump to content
SAU Community

Recommended Posts

Guys

Would anyone have the wiring diagram for the manual box on the R34 GTT. Its one of the last things to be completed on my auto to manual conversion and it would be handy to know what goes where. I am sure I saw this on the interweb somewhere but cant for the life of me find it.

Would be especially interested in hearing from any of the others who converted their auto GTTs to manual. The manual gearbox I have in the car is a R34 GTT one and NOT an R33 one like some have used and is on here in a tutorial.

Thanks in advance

Owen

Link to comment
https://www.sau.com.au/forums/topic/319593-r34-gtt-auto-manual-wiring-diagram/
Share on other sites

hey Owen - seeing as nobody's been able to reply;

i take it youve been reading the DIY on the 34 manual conversion using 33 parts. ie: http://www.skylinesaustralia.com/forums/Di...&p=2606536#

I assume the plugs on the gearbox for the reverse lights and speedo are in the same physical location of the gearbox. have you obtained the correct connector plugs for the manual box? (because these will be different)

also; have you swapped your speedo cluster to a manual item?

L

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...