Jump to content
SAU Community

Abs Removal. How To?

RBceffy25
 Share

Recommended Posts

RBceffy25 Rising Star

RBceffy25

Posted
Posted

Heya!

I am about to do an R33 brake conversion and Ichiba 5-stup upgrade on all four corners of my ABS equipped Cefiro.

I would prefer to remove the whole ABS system to reduce weight, increase engine bay space and just generally tidy up excessive line etc.

What is the correct way to do this?

Or do I just leave it alone all together?

Link to comment
https://www.sau.com.au/forums/topic/319743-abs-removal-how-to/
Share on other sites
RBceffy25 Rising Star

RBceffy25

Posted
  • Author
Posted
Even for track use, ABS can be very helpful, and its easy to disable (fuse).

If you must remove it, pull the globe from the dash, disconnect the loom under the rear shelf and remove the ABS computer, remove all the brake lines, ABS hub, sensors, etc.

Keep in mind the hard lines on Cefiro are Cefiro only...as they're a mix of using S13 master cylinder (which will also need to be replaced) running along an R32 firewall. Making your own solid brake lines isnt hard, if you're doing the R33 conversion you'll need to make up your own flexible brake hoses too (or dodgey modify the banjo bolt), so just do them all in one hit, but yeah, I reckon keep it...more con's than pro's if you remove it.

Do you have it?

Its seems to be a rather shitty system or mybe mine is faulty?

When i hit bumps on the road while braking the ABS has a tendency to kick in and then off again making it quite annoying. This happens when under braking and the driven wheel(s) skip off the ground when on a bumpy surface, causing a bit of slip in the diff or something and (i assume) the ABS computer reads this as high speed or hard braking braking and jumps into action when i dont want it to.

I like to be in full control of my cars functions but the ABS seems do have a bit of a mind of its own at times.

I have all the gear to do the conversion including braided lines etc.

I have also just been informed that there may be some legalities involved if i remove this. Is this the case?

If I keep the abs will it work with the hubs and calipers i have?

Or do I need ABS compatible hubs or something?

While on this toppic,

What the difference with the ABS diff? I have been told its longer but will this affect my decision to put a shimmed, 4.11:1 R33 center in it?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...