Jump to content
SAU Community

Recommended Posts

Hey everyone

Could some one tell me dose a S2 have a dash light control to adjust dim setting on the dash display as I have looked and played with every button I can find but cant seem to find anything

As well I cant see my gear selection lights around gear leaver I guest it dose come with lights or ?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/319835-dash-light-control/
Share on other sites

mine is either dim or off

would love to know if there is any way to brighten it up also, its a great brightness for country roads at nite but useless in the city or any road with street lights

Same goes for my R34GTT, instruments to bright at night, centre consol lights, especialy climate control, way too dim by day, if these are normal, in anotherwise terrific car, WTF were Nissan thinking when they did/didn't do this.

Edited by BASHO
Same goes for my R34GTT, instruments to bright at night, centre consol lights, especialy climate control, way too dim by day, if these are normal, in anotherwise terrific car, WTF were Nissan thinking when they did/didn't do this.

pretty sure my 32 had a dimmer too, or maybe it was my s13 (but may have been aftermarket)

i know that if you put led's in you cant dim them

I am at a loss to understand why Nissan did not fit a dimmer switch.

My R30 has one, and, you can put the electric windows up after the ignition is turned off.

Both those features are well appreciated and must have cost a pittance at manufacture.

pretty sure my 32 had a dimmer too, or maybe it was my s13 (but may have been aftermarket)

i know that if you put led's in you cant dim them

actually its my 31 that has it, dam useful it is too

Has anyone fitted one??? If so how???

I recently read a post on SAU where someone had the steering column covers orf and they found the switch taped up underneath, I immediatly checked mine==nothing however there are a number of vacant sockets under there any of which could be the one, WTF would know --?

My S2 doesn't. But interested in doing it.

Fyi check out the maxima/micra/exa/bluebird(aka sentra) etc in the 94 - 2000 range at the wreckers

dimmer switches are a dime a dozen and all the same, also fits the stag dash socket perfect.

Found my self a fog light switch last week and lotsa blanks to have for spare.

I'm pretty sure many import Nissans don't have it. I think it used to be part of compliance to fit a little pot that would dim the dash. My GTI-R had one that was definately fitted by compliance, but it was imported before all the compliance rules changed. Pretty sure my 260RS doesn't have any dimmer and it was imported after the rules changed.

FYI: I had LEDs installed in my cluster for a short while, and they are far too bright: very distracting when driving, and bright enough to give me headaches when driving more than half an hour at night. I find the centre console birghtness adequate, but believe it could be a little brighter. My Dolphin instrument cluster is the perfect brightness, but unfortunately is backlit in orange, so at night, my dash looks like the Las Vegas strip: orange instruments, blue defis, green console lights, different blue and green on the cd player, and different blue ana orange on the AVC-R.

In contrast, my V35 looks great with its massive stack of orange lights on the centre console, which actually matches (hooray!) the lights in the instrument cluster...

I have not done it yet but it is on the list. My gauges have different colour globes. You can get coloured sleeves to slip over the light. Red, blue and green. So you can have all one colour iin the console instrument cluster.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
    • How do you propose I cable tie this: To something securely? Is it really just a case of finding a couple of holes and ziptying it there so it never goes flying or starts dangling around, more or less? Then run a 1/8 BSP Female to [hose adapter of choice?/AN?] and then the opposing fitting at the bush-into-oil-block end? being the hose-into-realistically likely a 1/8 BSPT male) Is this going to provide any real benefit over using a stainless/steel 1/4 to 1/8 BSPT reducing bush? I am making the assumption the OEM sender is BSPT not BSPP/BSP
    • I fashioned a ramp out of a couple of pieces of 140x35 lumber, to get the bumper up slightly, and then one of these is what I use
    • I wouldn't worry about dissimilar metal corrosion, should you just buy/make a steel replacement. There will be thread tape and sealant compound between the metals. The few little spots where they touch each other will be deep inside the joint, unable to get wet. And the alloy block is much much larger than a small steel fitting, so there is plenty of "sacrificial" capacity there. Any bush you put in there will be dissimilar anyway. Either steel or brass. Maybe stainless. All of them are different to the other parts in the chain. But what I said above still applies.
    • You are all good then, I didn't realise the port was in a part you can (have!) remove. Just pull the broken part out, clean it and the threads should be fine. Yes, the whole point about remote mounting is it takes almost all of the vibration out via the flexible hose. You just need a convenient chassis point and a cable tie or 3.
×
×
  • Create New...