Jump to content
SAU Community

Recommended Posts

Wrecking a 1995 R33 GTST. Was involved in a pretty bad accident and alot of parts are damaged so its mostly only engine, driveline and suspension parts available.

Pick-up is available from Emerald, Victoria and i will post smaller items.

Parts -

RB25DET Engine - 125,000km - Comes with all ancilaries/belts/turbo/manifolds etc. Was running perfect when in the car. Is missing blow off valve, AFM, fan and engine mounts. Any inspection is welcome - $1300

Gearbox - Good condition - Has had the shifter cut for shorter throw - $1200

Excedy heavy duty clutch - Minimal use, still has factory marks on clutch plate - $100

Tailshaft - $100

Rear subframe with diff/axels/hubs/hicas/handbrake. Rear brakes removed - $350

Rear brakes with rotors - $200

Front brakes with rotors - $300

Front 5 stud hubs X 4 - $150 pair

Flywheel - $50

SMIC with pipes - $50

Black Rear bar - Paint in average condition - $100

Black Tail lights - $50 each

Rear Reo Bar (reinforcement) x 2 - $100 each

Black boot lid with S2 spoiler - Missing boot lock and light - $150

Castor rods x 2 - New urethane bushes - $50 each

4 x kings lowered springs, front and back. Back with KYB Shocks - Good condition - $250

Stock R33 GTST Cat back Exhaust - Perfect condition - $200

Also have these parts left over from other R33 wrecks:

Front Subframe - $40

S2 Door trims, have factory holes for tweeters - $15 Each

Radiator hoses - $10 each

Glovebox - $20

Auto Brake Pedal - $15

Accelerator Pedal - $15

Interior Carpet R33 - $30

Windscreen wiper stalk - $20 each

Boot trim, no carpet, few cracks which are unnoticable once fitted - $30

Turbo heatshield X 2 - $15 each

Windscreen washer bottle - $15

Seatbelt set - $40

Undertray stoneguard - $30

Turbo intake pipe - $15

ABS unit 1995 - $40

ABS unit 1998 - $50

S2 Passenger seat, small stain would be removable- $50

Automatic cooler - $20

Automatic shifter surround - $30

Aircon Condensor - $40

Centre console with Auto swich - $20

SRS passenger Airbag - $50

Airbag module - $20

Contact me Via PM or in this thread. Cheers

Link to comment
https://www.sau.com.au/forums/topic/320065-wrecked-r33-gtst-parts/
Share on other sites

S2 Door trims, have factory holes for tweeters - $15 Each

These the same door trims I offered to buy in your old thread?

PM me if you want to sell them...I didn't get any reply to PM/email/post in your old thread before?

Hey mate. I'm after the 4 x kings lowered springs, front and back. Back with KYB Shocks - Good condition - $250

Emerald is quite far, can we meet up somewhere closer to CBD?

Wrecking a 1995 R33 GTST. Was involved in a pretty bad accident and alot of parts are damaged so its mostly only engine, driveline and suspension parts available.

Pick-up is available from Emerald, Victoria and i will post smaller items.

Parts -

RB25DET Engine - 125,000km - Comes with all ancilaries/belts/turbo/manifolds etc. Was running perfect when in the car. Is missing blow off valve, AFM, fan and engine mounts. Any inspection is welcome - $1300

Gearbox - Good condition - Has had the shifter cut for shorter throw - $1200

Excedy heavy duty clutch - Minimal use, still has factory marks on clutch plate - $100

Tailshaft - $100

Rear subframe with diff/axels/hubs/hicas/handbrake. Rear brakes removed - $350

Rear brakes with rotors - $200

Front brakes with rotors - $300

Front 5 stud hubs X 4 - $150 pair

Flywheel - $50

SMIC with pipes - $50

Black Rear bar - Paint in average condition - $100

Black Tail lights - $50 each

Rear Reo Bar (reinforcement) x 2 - $100 each

Black boot lid with S2 spoiler - Missing boot lock and light - $150

Castor rods x 2 - New urethane bushes - $50 each

4 x kings lowered springs, front and back. Back with KYB Shocks - Good condition - $250

Stock R33 GTST Cat back Exhaust - Perfect condition - $200

Also have these parts left over from other R33 wrecks:

Front Subframe - $40

S2 Door trims, have factory holes for tweeters - $15 Each

Radiator hoses - $10 each

Glovebox - $20

Auto Brake Pedal - $15

Accelerator Pedal - $15

Interior Carpet R33 - $30

Windscreen wiper stalk - $20 each

Boot trim, no carpet, few cracks which are unnoticable once fitted - $30

Turbo heatshield X 2 - $15 each

Windscreen washer bottle - $15

Seatbelt set - $40

Undertray stoneguard - $30

Turbo intake pipe - $15

ABS unit 1995 - $40

ABS unit 1998 - $50

S2 Passenger seat, small stain would be removable- $50

Automatic cooler - $20

Automatic shifter surround - $30

Aircon Condensor - $40

Centre console with Auto swich - $20

SRS passenger Airbag - $50

Airbag module - $20

Contact me Via PM or in this thread. Cheers

hey mate interested in the exhaust if you could contact me that would be good

Was just wondering if the smic with pipes includes everything to put the car back to standard?

If so, very interested! Let me know.

Cheers

Its just the intercooler itself, 1 joiner and the pipe which connects to the pipes in the engine bay. No brackets etc. Cheers

Im interested in the brake pedal and auto cooler.

What's the rubber like on the brake pedal? I need one for a rwc.

What type of auto cooler is it?

Rubber on the brake pedal is like new. It's the stock standard Auto cooler. Cheers.

These the same door trims I offered to buy in your old thread?

PM me if you want to sell them...I didn't get any reply to PM/email/post in your old thread before?

Still haven't got any reply on the door trims???? I want them, but haven't heard anything from you.

Can you reply in thread if you still want to sell them or not? maybe i'm not getting your PM's or you missed my post.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...