Jump to content
SAU Community

Recommended Posts

Wrecking a 1995 R33 GTST. Was involved in a pretty bad accident and alot of parts are damaged so its mostly only engine, driveline and suspension parts available.

Pick-up is available from Emerald, Victoria and i will post smaller items.

Parts -

RB25DET Engine - 125,000km - Comes with all ancilaries/belts/turbo/manifolds etc. Was running perfect when in the car. Is missing blow off valve, AFM, fan and engine mounts. Any inspection is welcome - $1300

Gearbox - Good condition - Has had the shifter cut for shorter throw - $1200

Excedy heavy duty clutch - Minimal use, still has factory marks on clutch plate - $100

Tailshaft - $100

Rear subframe with diff/axels/hubs/hicas/handbrake. Rear brakes removed - $350

Rear brakes with rotors - $200

Front brakes with rotors - $300

Front 5 stud hubs X 4 - $150 pair

Flywheel - $50

SMIC with pipes - $50

Black Rear bar - Paint in average condition - $100

Black Tail lights - $50 each

Rear Reo Bar (reinforcement) x 2 - $100 each

Black boot lid with S2 spoiler - Missing boot lock and light - $150

Castor rods x 2 - New urethane bushes - $50 each

4 x kings lowered springs, front and back. Back with KYB Shocks - Good condition - $250

Stock R33 GTST Cat back Exhaust - Perfect condition - $200

Also have these parts left over from other R33 wrecks:

Front Subframe - $40

S2 Door trims, have factory holes for tweeters - $15 Each

Radiator hoses - $10 each

Glovebox - $20

Auto Brake Pedal - $15

Accelerator Pedal - $15

Interior Carpet R33 - $30

Windscreen wiper stalk - $20 each

Boot trim, no carpet, few cracks which are unnoticable once fitted - $30

Turbo heatshield X 2 - $15 each

Windscreen washer bottle - $15

Seatbelt set - $40

Undertray stoneguard - $30

Turbo intake pipe - $15

ABS unit 1995 - $40

ABS unit 1998 - $50

S2 Passenger seat, small stain would be removable- $50

Automatic cooler - $20

Automatic shifter surround - $30

Aircon Condensor - $40

Centre console with Auto swich - $20

SRS passenger Airbag - $50

Airbag module - $20

Contact me Via PM or in this thread. Cheers

Link to comment
https://www.sau.com.au/forums/topic/320065-wrecked-r33-gtst-parts/
Share on other sites

S2 Door trims, have factory holes for tweeters - $15 Each

These the same door trims I offered to buy in your old thread?

PM me if you want to sell them...I didn't get any reply to PM/email/post in your old thread before?

Hey mate. I'm after the 4 x kings lowered springs, front and back. Back with KYB Shocks - Good condition - $250

Emerald is quite far, can we meet up somewhere closer to CBD?

Wrecking a 1995 R33 GTST. Was involved in a pretty bad accident and alot of parts are damaged so its mostly only engine, driveline and suspension parts available.

Pick-up is available from Emerald, Victoria and i will post smaller items.

Parts -

RB25DET Engine - 125,000km - Comes with all ancilaries/belts/turbo/manifolds etc. Was running perfect when in the car. Is missing blow off valve, AFM, fan and engine mounts. Any inspection is welcome - $1300

Gearbox - Good condition - Has had the shifter cut for shorter throw - $1200

Excedy heavy duty clutch - Minimal use, still has factory marks on clutch plate - $100

Tailshaft - $100

Rear subframe with diff/axels/hubs/hicas/handbrake. Rear brakes removed - $350

Rear brakes with rotors - $200

Front brakes with rotors - $300

Front 5 stud hubs X 4 - $150 pair

Flywheel - $50

SMIC with pipes - $50

Black Rear bar - Paint in average condition - $100

Black Tail lights - $50 each

Rear Reo Bar (reinforcement) x 2 - $100 each

Black boot lid with S2 spoiler - Missing boot lock and light - $150

Castor rods x 2 - New urethane bushes - $50 each

4 x kings lowered springs, front and back. Back with KYB Shocks - Good condition - $250

Stock R33 GTST Cat back Exhaust - Perfect condition - $200

Also have these parts left over from other R33 wrecks:

Front Subframe - $40

S2 Door trims, have factory holes for tweeters - $15 Each

Radiator hoses - $10 each

Glovebox - $20

Auto Brake Pedal - $15

Accelerator Pedal - $15

Interior Carpet R33 - $30

Windscreen wiper stalk - $20 each

Boot trim, no carpet, few cracks which are unnoticable once fitted - $30

Turbo heatshield X 2 - $15 each

Windscreen washer bottle - $15

Seatbelt set - $40

Undertray stoneguard - $30

Turbo intake pipe - $15

ABS unit 1995 - $40

ABS unit 1998 - $50

S2 Passenger seat, small stain would be removable- $50

Automatic cooler - $20

Automatic shifter surround - $30

Aircon Condensor - $40

Centre console with Auto swich - $20

SRS passenger Airbag - $50

Airbag module - $20

Contact me Via PM or in this thread. Cheers

hey mate interested in the exhaust if you could contact me that would be good

Was just wondering if the smic with pipes includes everything to put the car back to standard?

If so, very interested! Let me know.

Cheers

Its just the intercooler itself, 1 joiner and the pipe which connects to the pipes in the engine bay. No brackets etc. Cheers

Im interested in the brake pedal and auto cooler.

What's the rubber like on the brake pedal? I need one for a rwc.

What type of auto cooler is it?

Rubber on the brake pedal is like new. It's the stock standard Auto cooler. Cheers.

These the same door trims I offered to buy in your old thread?

PM me if you want to sell them...I didn't get any reply to PM/email/post in your old thread before?

Still haven't got any reply on the door trims???? I want them, but haven't heard anything from you.

Can you reply in thread if you still want to sell them or not? maybe i'm not getting your PM's or you missed my post.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
    • EMU Classic. For what I need it to do I see no reason to upgrade. Link and Haltech would both cost an extra chunk of money for a lot of unutilized features
×
×
  • Create New...