Jump to content
SAU Community

Recommended Posts

Hi, Im Jake, im 19.

Recently i purchased this bad boy.

09052010.jpg

Its a 1987 Nissan Skyline HR31 GTS-X.

It has 126,000kms on the clock, and im stoked!

Runs a Redtop ECCS Rb20det, with a couple goodies, including a HKS 2510 turbo, GTR Intercooler, Malpassi Fuel Regulator, Fuel Cut Defender, BOV (needs removing), 3" Kakimoto Exhaust, Oil Catch Can, RB25det rocker covers, and a pod filter.

Suspension wise, it's got Pedders lowered springs, Pedders Shocks, and adjustable castor rods.

Rims are a set of 17x9 Stich Meshies for the front, and rears are the same, but in 9.5.

Paint is a custom pearlescent black. Basically, it's a 2009 Hilux black, with silver taken out..and a bit of sparkle/blue is added, looks pretty nice in the sunlight.

Exterior consists of a GTS-R spoiler and a modified GTR front lip.

Interior contains a CD player, Autometer Boost Gauge, and a Personal steering wheel.

Like every kid out there..i want this thing to have a rb26dett, full straight cut gearbox..yada yada yada, but no.

For the time being, im planning to get a NIStune, some decent spark plugs, Yellow Jacket Coilpacks, Coilovers, and a proper tune. Nothing over the top, but something that i can manage to keep me, my bank account, the parents, and the police happy.

09052010005.jpg

09052010003.jpg

09052010002.jpg

09052010004.jpg

boatlicense008.jpg

Link to comment
https://www.sau.com.au/forums/topic/320108-jakes-hr31-gts-x/
Share on other sites

Very nice :) Im running the redtop eccs motor in my oz spec r31 with a r33 sr1 turbo but looking at going hks 25/30 very soon. If your looking at getting your butterflys removed boostworxs will remove them for around $60 if you take the plate in.

Id put a set of redtop rocker covers back on :3some:

Cheers guys,

Didn't know many people still liked 2 door R31's!

Car currently does have some small things that need fixing.. seems to have a small flatspot at 3000rpm, but only in third gear..wether that is spark plugs, coilpacks, or something else, i plan on getting on to it.

Also, has a bit of detonation at 5000rpm. Again, it'll need a proper tune, this is where the NIStune will be coming in handy.

I'll most likely be giving Decs at Garage 7 in Adelaide the reigns of her, he's a good mate, and specialises in R31's, so i have no doubts about his abilities.

Being an apprentice diesel mechanic myself has it's benefits, a pit, quality oils, scanners and trade discounts at my disposal, i plan on making this thing run well..might enter a car show here and there, also, plenty of Track Days! My old automatic r31 loved it last year around Mallala, so this thing should do the same!

Edited by skwiz

This was going to be my daily whilst the R32 went stoopid impractical but still slow spec :) Agree, a neat R31 coupe is a cool daily driver. Wish that prick never tee boned mine all those years ago, I would still have it! Only grabbed my current R32 because it was neat and and i couldnt find another neat R31 back in 99. Fark that was a long time ago :D

whats with the TRD wheel :P

NOT YOU TOO!

Everyone notices it!

I'm not exactly too sure why it's there. Probably going to get my Momo Typ 35 steering wheel re-trimmed, and a momo horn button fitted soon, so it really isn't annoying me.

Also, tonight after work i fit up a new set of spark plugs. NGK Iriduim IX's. The older plugs that were in there (Bosch Platinum's) weren't that bad looking, had the usual burn marks on the tips. The Bosch one's also had quite fat tips underneath the metal barb covering it, whilst these NGK's have almost a pin needle with end to them..can anyone tell me why? It seems to have fixed the flatspot i had also..strange things.

Ordered a NIStune today from Garage 7, and should be installed next Monday afternoon. Fuel cut defender will be taken out, because apparently it is useless, and just tricks the AFM and ECU into doing different things. Tune and Dyno time will be done shortly after.

I'm unsure what power it will make. I'm hoping 16-17psi daily. When i told Decs, that the former owner said it make 217kw on 18psi, all i got was laughter..i too have my doubts about this.

I'd like 180-190kw, on a pretty reliable tune, nothing silly, but enough to keep me occupied.

I'll keep ya posted.

Jake.

Small update.

Got Garage 7 to install the NIStune Type 1 liveboard this evening, tune should hopefully be done within 2 weeks, on a hub pack dyno, mainly for the accuracy of these units. Fuel Cut Defender was removed also.

Will also be doing the Garage 7 AU Falcon Coilpack Conversion.

Cheaper, and something different.

  • 3 weeks later...

Got the car back today from Garage 7, and im extremely happy. Although Decs couldn't get it on the dyno today because of a small issue with another car at the dyno place, it should be done Monday.

I got the AU falcon coilpack setup done, aswell as a Bosch 040 fuel pump.

Decs has been fiddling with the ignition and fuel maps, and explained and showed me on the laptop, what it is doing, which im happy with..any excuse to get to know what my car is doing! There is no hesitation before the turbo hits boost like there was, and it just seems to run alot smoother than it did.

Bring on Monday's dyno time! Im not exactly too sure on what to expect power wise. I've been told 190kw, others 170kw..so i really am not too sure. Guess it depends what the injectors and AFM like.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Ahhh, I need the whole head unit. I definitely needed to roll back through and review your setup, ha ha! Neat setup they have going on. I just need a full double din head unit. But I want good and responsive. I might have to review what the likes of pioneer have out these days.
    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
×
×
  • Create New...