Jump to content
SAU Community

Recommended Posts

somewhere on the motor assembly. you just have to look around, sorry can't help you anymore cos I'm not pulling my door apart again after spending 5 hours to get to my passenger door lock actuator! (posted a thread here too about that)

I found it on Pg 10....

Ok mine is working like new again after doing the simple reset. I thought I was gonna have to take out all of the bolts again but Nissan/Infiniti made it easy to reset the motor.

I dont know if I missed it, but to do the reset remove the 3 bolts holding the panel and it is behind the smaller sticker on the metal door piece. Remove the sticker and its a little nipple poking out.

With the door open roll the window completely up without using the auto function. (Barely lift up until the window rolls up.

Close the door with you inside the vehicle.

Hold the reset button down while you press the window switch down to roll the window down. Do not use the auto roll down.

After rolling it completely down give it a couple seconds and then release both buttons.

Now you roll the window completely up without using the auto function and give it a couple of seconds before releasing.

Now you should be good. Roll down the window to open the door from the outside.

  • 1 month later...
  • 1 month later...

Hi guys,

I was having the window issue (passenger side) a few days ago and ended up cleaning out and reseting the motor. It worked for 2 days and then today coming home i put the windows down. a few min later I felt a bit hot and noticed it went back up on its own!! Tried putting it down again and no deal. Also the auto up/down when open/close the door isnt working again. Annoying!!.. specially when you put a couple of hours worth of work into it a few days ago... Anyway.. just wanted to confirm your thoughts, definately motor that needs replacing? or actuator? Where exactly is the actuator? Throughout all these DIY's i saw a lot of motor accessing/cleaning stuff but no actuator.. Forgive me if im blind..

thanks

  • 2 weeks later...

OK I got the know how to reset the motor. If your window wind down when you auto wind it up, or wind down when you close the door. Here is what my Uncle told me to do. He is a mechanic in Nissan Service Centre in Ipswich Motorway. After you take the motor with the gearbox out from the door frame. Plug the electrical back and turn ignition on. Start winding up or down the window using the switch, looking at the rotating shaft, count 8 numbers of turns. That will reset the motor and the limit switch.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...