Jump to content
SAU Community

Recommended Posts

bump

Fuel tank with sender and stuff 80 bucks

rear sub frame and diff 300

Series 2 passeger seat 50 bucks

back seat 80 bucks

door pannels and back interior pannels 120

Rh and Lh window glass 40 bucks for both

still heaps of stuff make offers need the shed space

Edited by blu hsv

Want this stuff gone i will sell the rest for 1300 and that is:

diff with cradle

fuel tank

front crossmember

power steering rack

a/c pump

brake booster and master cylinder

front hubs and top arms

interior minus drivers seat

dash pad

dash cluster

carpet

all door trims

roof lining

rh and lh glass

electric window regs

all door bits'

2 doors one needs repairs

steering collum

front rh gaurd

rear spoiler

rear bumper and reo

wiper arms wiper motor and linkage

full body loom

air bag set up and computer

have heaps more i need the space

basically whats left of the car

Edited by blu hsv
  • 2 weeks later...
  • 2 weeks later...
He man what have u still got left off the car? how much for the diff and everything else? and also i was the owner of the car until the roll over.

I threw out most of the stuff to the tip today. still have the side skirts and rear spoiler, rear bumper and a few other bits still have the diff make me an offer on it

He man what have u still got left off the car? how much for the diff and everything else? and also i was the owner of the car until the roll over.

I threw out most of the stuff to the tip today. still have the side skirts and rear spoiler, rear bumper and a few other bits still have the diff make me an offer on it

He man what have u still got left off the car? how much for the diff and everything else? and also i was the owner of the car until the roll over.

I threw out most of the stuff to the tip today. still have the side skirts and rear spoiler, rear bumper and a few other bits still have the diff make me an offer on it

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
×
×
  • Create New...