Jump to content
SAU Community

Recommended Posts

My dad is selling his R34 GTR V-Spec

Completely stock except for a trust PEII catback (which we put on the car and stock exhaust can be included if the buyer wants it)

Full service history from Japan

41,xxx KM's

Immaculate condition

This car is religiously serviced with Mobil 1 and never ever thrashed

Asking: $51,000

Contact Michael on 0413113219

or

me via email on Matt dot Dellamalva at Gmail dot com

P5152931.jpg

P5152932.jpg

P5152933.jpg

P5152934.jpg

P5152935.jpg

P5152936.jpg

P5152937.jpg

P5152938.jpg

P5152939.jpg

P5152940.jpg

P5152941.jpg

P5152942.jpg

P5152945.jpg

P5152946.jpg

Link to comment
https://www.sau.com.au/forums/topic/321233-r34-gtr-v-spec/
Share on other sites

  • 5 weeks later...
  • 1 month later...

Nice Car

will have to wait till my V35 is sold, but a bit more than what i can spend

not to mention the travel SA from QLD

Free bump for Nice Car, i doubt you can import 44,000KM one with Log Books for this price now and in Bayside blue

Link to comment
https://www.sau.com.au/forums/topic/321233-r34-gtr-v-spec/#findComment-5385212
Share on other sites

"car is never ever thrashed" - heinous. Why did you bother buying one? I think this is highly unlikely champ =P

I know it's against the rules to respond with non-sale-related comments, but this needs to be done... Who cares what you think? He's trying to sell a car that has had a mature (like me) owner. I can categorically state that none of my (much more powerful) cars has been thrashed. Sure, I have given them the odd squirt, but I wouldn't class that as being thrashed like a lot of lesser cars are: having their necks wrung every time the owner gets behind the wheel.

Grow up, WhatBrake... If you genuinely have the performance, you generally find yourself with less to prove, let alone the need to drive like an idiot...

Oh yeah: free bump for a lovely GTR... :ermm:

Link to comment
https://www.sau.com.au/forums/topic/321233-r34-gtr-v-spec/#findComment-5387714
Share on other sites

"car is never ever thrashed" - heinous. Why did you bother buying one? I think this is highly unlikely champ =P

I didnt buy one

my 56 year old dad did

what you think you know but actually dont could fill a book...a big one

Grow up, WhatBrake... If you genuinely have the performance, you generally find yourself with less to prove, let alone the need to drive like an idiot...

precisely

Link to comment
https://www.sau.com.au/forums/topic/321233-r34-gtr-v-spec/#findComment-5387893
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Next, remove the upper and lower radiator hoses, both are held with a spring clamp. While you are under there, tackle the Auto Trans cooler lines.  Again both are held on with spring clamps, and as mentioned above you should cap them on the radiator side with an 8mm cap, and on the car side loop them with a length of 8mm pipe - this will stop you losing a dangerous amount of AT fluid during the rest of the job If you've been meaning to add a sender for AT trans temp, this is a great time to do it; put a sender fitting into the passenger side line as that is the inlet to the cooler/radiator.
    • Next you need to remove the intake duct (as with pretty much every job on these cars), it is a series of clips you gently remove with a flat bladed screwdriver. They do get brittle with time and can break, and I have not found a decent quality aftermarket one that fits (they are all too soft or flimsy and don't last either) but the nissan ones are a couple of bucks each (ouch).  Once the clips are off (either 8 or 10, I didn't check) you lift the intake duct out and will see the reservoirs Undo the line into the radiator side cap (some bent needle nosed piers are awesome for spring clamps) and then remove the 4x 10m nuts that hold both in place.  I didn't get these pics, but remove the line under the radiator reservoir (spring clamp again) then remove that reservoir. Then you can get at the intake reservoir, same thing, spring clamp underneath then remove it. BTW This is a great time to put in a larger (+70%) combined reservoir that AMS makes..... https://www.amsperformance.com/product/q50-q60-red-alpha-coolant-expansion-tank/ They also make an Infiniti branded and part# version if that is your thing
    • To drain the Intake Heat Exchanger, there is a crappy drain plug in front of the driver's side front tyre: You should use the largest headed phillips screwdriver you had, and in my case I needed vice grips on the hose above as the plug was tight (tighter than it needed to be, since it has an o-ring seal).  After you have a tray down and open the drain, open the intake heat exchanger reservoir cap (drivers side one) and you should get a couple of litres of coolant To get to the radiator, you need to remove the plastic engine undertray. It is held on with a series of 10mm headed bolts and some clips. For the radiator, there is another type of crappy drain (kind of like a plastic banjo bolt) and you should attach a length of hose to direct the stream of coolant per this pic (otherwise the coolant hits the rad support and goes everywhere). The drain is on the rear of the radiator on the driver's side and a bit hard to find. Put a big tray or bucket down (5l won't be enough) and slowly unscrew the fitting by hand. You only want to remove it far enough for coolant to flow, it you unscrew it right out the whole fitting and direction pipe will come off and you will get a coolant bath (yum!). Undo the radiator reservoir cap and it should empty about 8l
    • So, this shouldn't be such a mission, but there were a few tricks so I thought I'd post up a DIY for it. This was on a Q50 Red Sport but I doubt any other V37 model is very different (maybe just less steps for the intake heat exchanger hoses) I pulled the radiator out to flush it because the car was running hot at the track, but obviously the same steps apply for changing a radiator for any reason including an upgrade. If you are removing the radiator, you of course need to drain and refill, so have 5+ litres of blue coolant ready. You also need to drain the intake heat exchanger to remove the radiator so you will need a couple of litres for that as well. You will also need something to deal with the auto transmission lines, I used 2x 8mm rubber caps on the radiator side, and a short length of 8mm pipe on the car side.....unless you can block these lines quickly you will loose AT fluid and it may be enough to hurt the transmission if you don't refill it. 2 other tools that really help dealing with coolant lines and spring clamps are Bent Needle Nose pliers Hose pliers Between them they will reduce the frustration (and injury) potential by about 1000% Other than that....lets go... "First, jack up your car". Yes really, and put it safely on stands. If you are not confident doing that you need to give this job to a mechanic
    • If the forester is anything like our old 2007 GTB Liberty, I could near on run ling Long's and "rate them", as no matter what, it just hung to the road, even when abusing it in a hard launch in the wet, or throwing it at corners.
×
×
  • Create New...