Jump to content
SAU Community

Recommended Posts

Reason Psymin's car was doing 12s was it was wheelspinning most of the time. I'm sure it could do better with Micky Thompson Drag tyres and maybe a slightly different suspension set up. It was very fast around Pukekohe.

My S1 is lowered on Bilsteins, has heavy sway bars, adjustable camber, pineapples, semi slicks (now slicks) on the track and handles heaps better than stock but was still getting passed by little cars with half my horsepower on the track.

I enjoy having a completely stock looking wagon which will have 300 -400kw by the time I am finished. the only reason

I don't build a track car is I am too poor.

Kiwi:

Stereo is a must for any car of mine, as it stands I have 3 amps, 8 speakers and a 25 kilo sub (not including box). I am about to add 2 more subs. It would be the same for any car I buy, tracked or not and was factored into my thinking already :D

Kiwi:

"It was very fast around Pukekohe." Is Pukekohe a track in NZ? You wouldn't happen to know or have a link to track times? I'll google it :)

Not worried about the money coming back, modifying my car is my number 1 hobby, I'm happy to write it off! Looks like I have some more thinking to do :P

Cheers for all the opinions guys :)

Edited by stageaharts

Pukekohe used to be the main racetrack for Auckland. The Aussie supercars used to have a round there (its at a Hamilton Street circuit at the moment. Sorry I don't have any times - maybe contact Simon direct. There is no doubt that his car is fast by any standards (despite the modest 1/4 mile times) but it cost him megabucks and many hours to build.

  • 2 weeks later...
i've recently discovered how badly a stock C34 Stag (RS Four S) is in the twisties

sure it pulls out of corners quite nicely, but is hard to carry speed into, given the weight of the car (stock suspension didn't help!)

i was following a mate in his Caldina GT-T, and he left me for dead, although he just installed some nice Tein coilovers, whilst mine is stock in every way shape and form

imo, a Stag is not, and will not ever be a "bang for your buck" track/strip car

a unique, comfortable tourer? hells yes

with enough $'s, sure it could be competitive, but "bang for buck" you'll get better results elsewhere

good luck with it :)

The GT-Four N ST246 Caldina is even better again in terms of ability in the tight and twisty stuff. TRD got the suspension set-up sorted nicely, and the Torsen LSD helps too.

How much does a C34 RS Four S weight? The GT-Four N is listed at 1480-1490, but it doesn't feel that heavy at all.

They are rather heavy aren't they? I can see why the overall handling performance is down in comparision to the lighter and almost as powerful ST215. There's a reasonably big difference in power-to-weight ratio between the two, and the ST246. The biggest shame about the ST246 (all versions) is the bland tiptronic auto 'box. But it's acceptable enough for the daily urban grind and the additional suspension and drivetrain tweaks do make the N a hell of a lot of fun when you hit the twisty stuff.

I was in the same boat about 8 months ago...

My Stagea had fmic, 3" exhuast, apexi intake and raised the boost to 11-12psi and was fun for a little while but got over it quickly... Was tossing up spending cash on performance mods for such a large family car or get my misses a Forester and buy myself a toy...

So i sold my S1 C34 Stagea, got the misses a Forester for carting the kids around and brought myself a MA70 Supra with a fully forged motor, T04z 800hp turbo and 5 speed manual and havn't looked back :blink:

They are rather heavy aren't they? I can see why the overall handling performance is down in comparision to the lighter and almost as powerful ST215. There's a reasonably big difference in power-to-weight ratio between the two, and the ST246. The biggest shame about the ST246 (all versions) is the bland tiptronic auto 'box. But it's acceptable enough for the daily urban grind and the additional suspension and drivetrain tweaks do make the N a hell of a lot of fun when you hit the twisty stuff.

if the ST246 was available with a manual box, i'd be all over it like a rash!

mine ran 11.3 at 125mph with 417rwkw (on a 2wd dyno, though drags was done in 4wd), shitty 235 17' street tyres and full weight s1 with twin sunroofs, around the 1800kg+ mark with me in it. Definately had more in it at that power level, i was spinning 1st and start of 2nd. I was up with sports bikes on the street and pretty much unbeatable unless something else had 4wd as well. If you wanna go round corners etc buy a gtr or something, the stagea isnt gonna ever be a decent track car simple as that.

I had spent alot of cash and for one the stock gtr 5 speed wont handle it so i had a dogbox in it, which itself is not cheap at all.

If you want some cheap fun this is the way to go..

r32 gtst, stock rebuilt rb30 with 25 or 26 head, gt3076r or 35r and run 420rwhp or so all day everyday and its cheap as hell, reliable, and will run mid to low 11s easy with stock 5 speed box and they are light and handle well. Pretty bunky daily drivers though, im talking as a track fun car and have another daily driver vehicle to commute in.

Edited by unique1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had 3 counts over the last couple of weeks once where i got stranded at a jdm paint yard booking in some work. 2nd time was moving the car into the drive way for the inspection and the 3rd was during the inspection for the co2 leak test. Fix: 1st, car off for a hour and half disconnected battery 10mins 4th try car started 2nd, 5th try started 3rd, countless time starting disconnected battery dude was under the hood listening to the starting sequence fuel pump ect.   
    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...