Jump to content
SAU Community

Recommended Posts

Just practice, practice, practice! Read a few sites and go experiment a bit. That's what I did, as well as asking advice from the guys on here.

Also, if you can do a course on it, you'll learn heaps. My parents bought me one for my birthday this year, best present ever!! Lol

Hopefully i learn how to use my camera properly by next year
Just practice, practice, practice! Read a few sites and go experiment a bit. That's what I did, as well as asking advice from the guys on here.

Also, if you can do a course on it, you'll learn heaps. My parents bought me one for my birthday this year, best present ever!! Lol

Agreed, take heaps of photos using different settings and just experiment to see what works. Even something as simple as putting your camera on a tripod, not moving it, and just playing with random settings on the camera can teach you a whole lot!

Oh, and forget the "Auto" mode - read some books/magazines/websites and watch some videos on YouTube or Canon's own "World of EOS" site. There's no use having a D-SLR if you're only going to use the Auto mode.

Don't get a cheap one. The expensive ones are expensive for a reason. Better support, less vibration, stronger and more expandable e.g. the legs can go everywhere and so can the neck of the tripod.

For a beginners tripod, a SLIK or manfrotto tripod would do a good job for relatively cheap (between $100-$200 with the normal panhead). I suggest buying a ballhead like a Manfrotto 488RC2 for ease of manouevrability when panning etc it is less restrictive than a panhead.

Unless you plan on supporting 400 2.8's and big super tele lenses, there is no need for you to invest in expensive tripods like Gitzo's unless you become professional, need them essentially for landscape photos or super strong support for heavy stuff or unless you have the money to blow on them :)

Hope i helped.

Hopefully i learn how to use my camera properly by next year

THey are fine, because you're using Auto (I was too lol) you will be capturing "non-moving" images. Enthusiasts call that happy-snaps.

You need 3 things to make your photos more creative:

1. Switch your camera mode to P or M

2. Get fast zoom lenses with a good range (etc 70-200mm or higher)

3. Imaging software (Adobe etc)

3. Practice the above 3

With an 11-16mm, food and a portable chair for one old man :) in both hands, I did not have the setup to take many shots let alone panning ones.

As for cheap DSLRs, they are fine as long as you have access to manual mode. Sometimes it is better to work your way up once you figure out the type of photographer that you are and the lenses that you have. Don't be put off if someone has a more expensive body or lenses than you, it's the person behind the camera that counts.

I can +1 for the slik tripod.

Yes it's cheap and shitty, but I haven't really found a situation where it hasn't done a good enough job for me. It's nice and light too.

I'd only upgrade if I was going to do more panning, or if i was going on a proper adventure as it's not the most robust unit out there.

still.. good for entry level.

THey are fine, because you're using Auto (I was too lol) you will be capturing "non-moving" images. Enthusiasts call that happy-snaps.

You need 3 things to make your photos more creative:

1. Switch your camera mode to P or M

2. Get fast zoom lenses with a good range (etc 70-200mm or higher)

3. Imaging software (Adobe etc)

3. Practice the above 3

With an 11-16mm, food and a portable chair for one old man ;) in both hands, I did not have the setup to take many shots let alone panning ones.

As for cheap DSLRs, they are fine as long as you have access to manual mode. Sometimes it is better to work your way up once you figure out the type of photographer that you are and the lenses that you have. Don't be put off if someone has a more expensive body or lenses than you, it's the person behind the camera that counts.

Good advice! Although..

I wouldn't suggest going from Auto to M purely for the fact you won't be able to troubleshoot why your photos are so over-exposed/blurry/under-exposed etc etc...

For motorsports or any type of photography where you are panning and you are just starting out, i recommend using TV (a.k.a Shutter speed priority) mode. This will allow you to change the shutter speed to a speed you can comfortably pan with but still show motion (anywhere from 1/160th & slower). The camera will control the aperture for you, therefore all you have to focus on is shutter speed and controlling your ISO.

Of course, the faster/closer you are to a car that is moving fast, you can bring your shutter speeds up and still get enough motion blur because of the speed you are panning.

Try out your cameras FPS burst as well. When using burst mode, try not to max the buffer out, but a simple burst of 3-5 shots.

I suggest not using the "Auto" focusing modes either. Choose a single point (the middle being the most accurate) and focus on composition and getting spot on focus this way. Also, do not use single shot for the AF. Change this to AI Servo (for canon) i can't remember what it is for Nikon but i think its continuous servo.

Practicing with a kit lens e.g. 55-200, 75-300 etc.. is great before spending big bucks on lenses and wondering why they aren't miraculously making spectacular images. It's all about practice and your technique. Also when using super tele's e.g. 400mm+ atmospheric haze also comes into consideration to do with sharpness e.g. heat waves in the roads. It's also much HARDER to keep the lens steady, which is why if your using lenses this long, i suggest getting a monopod until you've had practice with panning.

The main technique with panning is to have your feet pointing towards where you want to take a shot and twist your body so you can follow/track the car until it reaches your point where you want to take photo. I have found this produces more consistent results for myself and tonnes of other people, but each to there own.

Remember not to get frustrated also! Panning is super frustrating! Practice practice practice and results will come over time.

Good luck and post up some more photos!

Edited by FST513
Good advice! Although..

I wouldn't suggest going from Auto to M purely for the fact you won't be able to troubleshoot why your photos are so over-exposed/blurry/under-exposed etc etc...

For motorsports or any type of photography where you are panning and you are just starting out, i recommend using TV (a.k.a Shutter speed priority) mode. This will allow you to change the shutter speed to a speed you can comfortably pan with but still show motion (anywhere from 1/160th & slower). The camera will control the aperture for you, therefore all you have to focus on is shutter speed and controlling your ISO.

Of course, the faster/closer you are to a car that is moving fast, you can bring your shutter speeds up and still get enough motion blur because of the speed you are panning.

Try out your cameras FPS burst as well. When using burst mode, try not to max the buffer out, but a simple burst of 3-5 shots.

I suggest not using the "Auto" focusing modes either. Choose a single point (the middle being the most accurate) and focus on composition and getting spot on focus this way. Also, do not use single shot for the AF. Change this to AI Servo (for canon) i can't remember what it is for Nikon but i think its continuous servo.

Practicing with a kit lens e.g. 55-200, 75-300 etc.. is great before spending big bucks on lenses and wondering why they aren't miraculously making spectacular images. It's all about practice and your technique. Also when using super tele's e.g. 400mm+ atmospheric haze also comes into consideration to do with sharpness e.g. heat waves in the roads. It's also much HARDER to keep the lens steady, which is why if your using lenses this long, i suggest getting a monopod until you've had practice with panning.

The main technique with panning is to have your feet pointing towards where you want to take a shot and twist your body so you can follow/track the car until it reaches your point where you want to take photo. I have found this produces more consistent results for myself and tonnes of other people, but each to there own.

Remember not to get frustrated also! Panning is super frustrating! Practice practice practice and results will come over time.

Good luck and post up some more photos!

Listen to this man :banana:

Good advice! Although..

I wouldn't suggest going from Auto to M purely for the fact you won't be able to troubleshoot why your photos are so over-exposed/blurry/under-exposed etc etc...

For motorsports or any type of photography where you are panning and you are just starting out, i recommend using TV (a.k.a Shutter speed priority) mode. This will allow you to change the shutter speed to a speed you can comfortably pan with but still show motion (anywhere from 1/160th & slower). The camera will control the aperture for you, therefore all you have to focus on is shutter speed and controlling your ISO.

Of course, the faster/closer you are to a car that is moving fast, you can bring your shutter speeds up and still get enough motion blur because of the speed you are panning.

Try out your cameras FPS burst as well. When using burst mode, try not to max the buffer out, but a simple burst of 3-5 shots.

I suggest not using the "Auto" focusing modes either. Choose a single point (the middle being the most accurate) and focus on composition and getting spot on focus this way. Also, do not use single shot for the AF. Change this to AI Servo (for canon) i can't remember what it is for Nikon but i think its continuous servo.

Practicing with a kit lens e.g. 55-200, 75-300 etc.. is great before spending big bucks on lenses and wondering why they aren't miraculously making spectacular images. It's all about practice and your technique. Also when using super tele's e.g. 400mm+ atmospheric haze also comes into consideration to do with sharpness e.g. heat waves in the roads. It's also much HARDER to keep the lens steady, which is why if your using lenses this long, i suggest getting a monopod until you've had practice with panning.

The main technique with panning is to have your feet pointing towards where you want to take a shot and twist your body so you can follow/track the car until it reaches your point where you want to take photo. I have found this produces more consistent results for myself and tonnes of other people, but each to there own.

Remember not to get frustrated also! Panning is super frustrating! Practice practice practice and results will come over time.

Good luck and post up some more photos!

Good advice, admittedly I haven't used the other settings as much as auto and manual. I find myself using manual 65% of the time and auto for the rest. I think using manual forces you to understand your camera better and through practice and habits you already know what kind of settings you need to shoot the subject whether its in motion or not or in low light or high.

As for panning, I myself haven't done this but logic tells me that getting a monopod (or tripod) would produce a smoother rotation of the camera especially if it is front-heavy.

I haven't got a tripod but will be getting one soon, got any recommendations for under $200? I carry light so prefer something that's not too heavy.

Good advice, admittedly I haven't used the other settings as much as auto and manual. I find myself using manual 65% of the time and auto for the rest. I think using manual forces you to understand your camera better and through practice and habits you already know what kind of settings you need to shoot the subject whether its in motion or not or in low light or high.

As for panning, I myself haven't done this but logic tells me that getting a monopod (or tripod) would produce a smoother rotation of the camera especially if it is front-heavy.

I haven't got a tripod but will be getting one soon, got any recommendations for under $200? I carry light so prefer something that's not too heavy.

Don't get me wrong, i use Manual 24/7. It's a habit that i have got into. My dial will never move off Manual unless the light is ALWAYS constantly changing e.g. clouds/sun/clouds/sun even then i will already have exposures for both sorted out, but if i have to, i will use different modes for different situations. As long as you get the shot, that's all that matters :bunny:

When your starting out, manual can be very confusing though. As i said in my previous post, trouble shooting will be too hard if you don't understand what histograms read or why its under/over exposed/no DoF/too much DoF etc etc... I was just simply advising, if you want to start panning, use TV to get used to the settings the camera sets and then when you feel comfortable switch it to Manual for more control. It's always good to expose to the right as well :D

Depends on what lens you are using... E.g. Panning with a 400 2.8 or bigger, is not really logical to not use a monopod. I mean, you might get some good shots but damn your arms are going to be sore! I don't use a tripod/monopod unless i'm using a 300 2.8+ simple for the fact of not getting sore arms at the end of the day.

As mentioned above, you can pick up a SLIK tripod which isn't heavy (for a good tripod) and it does everything you need with unlockable legs for wider spread (<-- that sounds really dirty haha) and adjustable centre column you can raise up and down. Otherwise i think the Manfrotto 055XBPRO its called or something like that, is around $200-$250. Before buying one, go to your local camera store and check them out for weight, ease of use and adjustability.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...