Jump to content
SAU Community

Rb25det Into R32 Starting Issues

war32

By war32,
in Engines & Forced Induction

 Share

Recommended Posts

war32 Apprentice

war32

Posted
Posted

Ok, i recently transplanted a series 2 rb25 into my 32, everything went mostly as expected, used 33 loom, spliced to suit 32 body loom, heres where the problems start.

The car turns over, fuel pump runs like its supposed to, injectors are firing fuel into the cylinders, have 12v power to the white wire on the coils, but i have no spark.

i turned the cas over by hand, and can hear the injectors clicking away, so i figure its not the cas, i have power to the coils, so i figure its not a power supply problem, but i cant work out why i have no spark

please help. im lost.

Link to comment
https://www.sau.com.au/forums/topic/321743-rb25det-into-r32-starting-issues/
Share on other sites
Simon-S14 Grand Master

Simon-S14

Posted
Posted

so cas is ok if its driving the injectors. and you defo have power to the coils yes? if so have you hooked up all the earthing points correctly?

another thing. wwhere the plug bolts into the ecu make sure the ends of the plug are pushed in all the way as well... have had issues there before.

  • 1 month later...
krayzie32 Mentor

krayzie32

Posted
Posted

any luck with this as im now having same problem...

also i can hear injectors clicking away does that also mean that the cylinders are filling up with fuel???

but i also think im getting a very very faint spark cos i can hear it popping but not visible

also can the injectors solenoid go off but still be blocked and not allow fuel therefore not allowing fuel but still making the clicking???

ive just installed injectors and coils and now im have the same problems

ive tried changing ecu too no resolve

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...