Jump to content
SAU Community

Recommended Posts

High guys.. im about to purchase a GT3040 + Tial 38mm W/G and a stainless teel manifold. Wat do u guys think about this setup.. considering i have atm EMS computer, BOSCH 60hp Fuel pump, stock intercooler and stock injectors + High flowed T3/T4 which is really laggy. the GT30 im gatting has got the .63 exhaust and .72 inlet.

Ill apreciat any comments and opinions about this purchase.

many thanx

---Babak--- :rofl:

Link to comment
https://www.sau.com.au/forums/topic/32191-garrett-gt3040/
Share on other sites

  • Replies 174
  • Created
  • Last Reply

Top Posters In This Topic

Yup - get a FMIC. You will need 550cc injectors .

Get a 600HP fuel pump too - joking ! !

I personally don't like EMS ECU's - what type is it ?

Possibly better with a PFC, Microtech or Wolf.

Have you got EBC ?? I would recomend this too.

GT3040 is a nice turbo

What manifold are you using ?

PS I have a GTR cooler with GTS-T mounts for sale - see the for sale section ( /end shameless plug)

Link to comment
https://www.sau.com.au/forums/topic/32191-garrett-gt3040/#findComment-646403
Share on other sites

High guys.. im about to purchase a GT3040  + Tial 38mm W/G and a stainless teel manifold.

This sounds like a GCG Kit... am i correct ??? :wassup:

Anyhow. As others have said.

You'll need Injectors and FMIC before you even can think about the turbo.

I'd also suggest getting the GT3040 with a .82 rear housing.

it wont be too laggy at all.

I'm having one fitted ATM. Will be done in 3-4 weeks.

Link to comment
https://www.sau.com.au/forums/topic/32191-garrett-gt3040/#findComment-646910
Share on other sites

is my calculation correct in saying that it ~250rwkw ???

Good power on stock injectors...

Bringing out a good forumla worked out here on these forums

HP = (370 / 5) * 80% = 59.2 hp Per Injector

59.2 * 6 = ~355.20HP worth through the injectors (that aint at the wheels)

The above 80% being that there is a 20% allowance for cold start/run/ etc.

And your virtually making that at the wheels and not even close to maxing the injectors...

Mind you... i cant remember what fuel pressue that the forulma worked on.

I cant remember it all :)

So if someone can work out how too allow for the fuel pressure that'd be great!

Link to comment
https://www.sau.com.au/forums/topic/32191-garrett-gt3040/#findComment-646957
Share on other sites

Thanks alot guys for your comments.. as i talked to my mechanin i asked him to make me one custom manifold and oil lines + custom FMIC installed and ill get the tubo and wastegate...

i heard that i can make close to 240rwkw with this setup even more.. (i wish :) ).

R31NISMOID: yes it is their deal which is pretty good as i went around and sked other dealers..

So guys any thing else that i need to be aware of?? plz let me know...

And about the injectors i might put the BOCSH 600cc on l8r on.. or if a better deal ill put it now..

At the moment all i want is a 12 Sec. car.

What you guys think i might get down the 1/4 with the above setup???

Thank you guys again for your comments..

--- Babak ---

Link to comment
https://www.sau.com.au/forums/topic/32191-garrett-gt3040/#findComment-647313
Share on other sites

i heard that i can make close to 240rwkw with this setup even more.. (i wish :( ).

R31NISMOID: yes it is their deal which is pretty good as i went around and sked other dealers..

What you guys think i might get down the 1/4 with the above setup???

you'll make 240rwkw with ease.

more upto 280rwkw.

But your motor wont last the distance.

So 250rwkw to be safe.

As for your run... i ran a 12.9 with 203rwkw so you'll smash a 12.5 or less easily.

Just gotta get the power to the ground

Link to comment
https://www.sau.com.au/forums/topic/32191-garrett-gt3040/#findComment-648284
Share on other sites

I have GT3040 BB CHRA with T04B 0.6 A/R comp housing machined out. Also Sierra Cosworth internal gate exh housing with 0.63 A/R. I'm using 0.6 comp cover so that it clears exh manifold.

All support sfuff is totally STOCK except injectors (550), FMIC and Microtech. So stock exh manifold, inlet manifold, cams and throttle body.

I am getting 265rwkW (Dyno Dynamic) at 1.2 bar with power dropping off a fraction above 6300rpm, but still 250-255 at redline. I have "full boost" at 3800rpm.

I am very happy with setup but definately less responsive than stock turbo below 3500rpm . I wouldn't recommend 0.87 exh housing, would be too laggy unless absolute top end power is wanted but then only worthwhile with nice tubular exhaust. Heaps experienced tune shops here recommend 0.6 odd A/R, heaps of power can still be made.

So that's the only other thing, I reckon mine would respond really well to nicer exh manifold.

Link to comment
https://www.sau.com.au/forums/topic/32191-garrett-gt3040/#findComment-649456
Share on other sites

Hey INSANT, could you post a couple more pics of teh manifold? Like one from the other side please? Just curious about the GCG manifolds and how the runners are shaped + welded. Thansk!

I snapped that pic just before it got put on the car about 1 month ago. I had a few problems with the manifold because when we first tried to bolt it to the head it would not seal properly, so it had to be taken off and refaced. They we reinstalled it and when the turbo was bolted on the exh housing was touching the block because the flange on the manifold was slighly angled towards the block, so the turbo had to come off and flange modified to the exh wouldnt touch. Finially its all back together and should have the braided lines and new dumps etc finished. I only had my camera there the first time.

I would not recommend this manifold, and its not a gcg manifold or turbo. I just hope it works well!

Link to comment
https://www.sau.com.au/forums/topic/32191-garrett-gt3040/#findComment-649530
Share on other sites

Thanks INASNT for the coment...

Yeah about the Manifold i talked to my mechanic and hes ganna make one for me You might know him Vince Rigoli... and im getting the FMIC and oil lines at the same time and I might get Injectors done aswell (600cc) as he recomended.... and then fingers crossed for the dyno day.. :)

Once again thank you guys for ur comments and Take care...

Cheers

--- Babak ---

Link to comment
https://www.sau.com.au/forums/topic/32191-garrett-gt3040/#findComment-649817
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...