Jump to content
SAU Community

Recommended Posts

hey got my r32 up for sale! has had heaps of coin spent on it over the last 3 years ive owned it...makes sweet power with the hks 3037 gt pro turbo! spoools hard by 3500rpm and holds till 8200 :( will b sad to see it go but now im looking for a lil more of a cruiser! so ne one thats interested plz dont hesitate to txt me and ill tell u more about this crazy machine!

mods:

s1 rb25

acl race series pistons rings bearings

npc built clutch

stainless manifold

hks 3037gt pro s turbo on 6b00st mani

hks 50mm gate with screamer

respray morpheous purple

advanti chrome 18z

viva garage full kit

carbon vented bonet

vi-pec ecu

coilovers tein coilovers

front mount

shimed diff

drift catch tank

aftermarkt FMIC

flared and rolled rear guards

front(mines) and rear(whiteline) strut braces

recently replaced exhaust valve guides, valve stem seals and lifters (under 1000km) new head gasket, exhaust gasket, rocker gaskets, and intake manifold gasket

plus heaps more. makes 288kw on 15psi :( this tune was done as a quick safe run in tune around a year ago for powercruise and havent needed to touch it since!

one bad point is that the teins may need replacing. am looking around for a new set as we speak.

looking for 17k(neg) or may swap for 180sx/s14/wrx with adjustment. cheeers andy g. txt me for pics 0400341730

post-55077-1275024274_thumb.jpg

post-55077-1275024288_thumb.jpg

post-55077-1275024304_thumb.jpg

post-55077-1275024320_thumb.jpg

post-55077-1275024410_thumb.jpg

post-55077-1275024425_thumb.jpg

Edited by andygr32
Link to comment
https://www.sau.com.au/forums/topic/322503-fs-89-r32-gtst-rb25-hks-3037/
Share on other sites

still got the rb20 gearbox mate? if you dont sell it would you consider selling the engine seperate?

hey mate nah run a vl-t rb30 box. reconditioned. havent got the 20 box. ah and as for selling the engine separate i hope it doesnt come to that to b honest.

hey got my r32 up for sale! has had heaps of coin spent on it over the last 3 years ive owned it...makes sweet power with the hks 3037 gt pro turbo! spoools hard by 3500rpm and holds till 8200 ;) will b sad to see it go but now im looking for a lil more of a cruiser! so ne one thats interested plz dont hesitate to txt me and ill tell u more about this crazy machine!

mods:

s1 rb25

acl race series pistons rings bearings

npc built clutch

stainless manifold

hks 3037gt pro s turbo on 6b00st mani

hks 50mm gate with screamer

respray morpheous purple

advanti chrome 18z

viva garage full kit

carbon vented bonet

vi-pec ecu

coilovers tein coilovers

front mount

shimed diff

drift catch tank

aftermarkt FMIC

flared and rolled rear guards

front(mines) and rear(whiteline) strut braces

recently replaced exhaust valve guides, valve stem seals and lifters (under 1000km) new head gasket, exhaust gasket, rocker gaskets, and intake manifold gasket

plus heaps more. makes 288kw on 15psi :P this tune was done as a quick safe run in tune around a year ago for powercruise and havent needed to touch it since!

one bad point is that the teins may need replacing. am looking around for a new set as we speak.

looking for 17k(neg) or may swap for 180sx/s14/wrx or forrester with adjustment. cheeers andy g. txt me for pics 0400341730

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...