Jump to content
SAU Community

Iphone Engine Obd Monitering

Davyboy

By Davyboy,
in Western Australia

 Share

Recommended Posts

Davyboy Enthusiast

Davyboy

Posted
Posted

Hey guys

A bloke at work just bought one of these things, im just waiting for it to be delivered so i can have a play

Its called a KIWI Wi-Fi made by PLX systems.

What it does is plug into your OBD 2 port on your car and creates a wireless network within your car. It then connects to your IPHONE and through an app (which you buy from the app store) you can see just about everything that the computer sees from the engine. You can bring up things like boost pressures, injecter duty cycles, engine oil and water temp, engine revs, speed, throttle postion etc etc etc. It pretty much eliminates the need to buy aftermarket guages and the like.

Have a look :

http://www.plxkiwi.com/kiwiwifi/

<object width="640" height="385"><param name="movie" value="

name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="
&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

<object width="640" height="385"><param name="movie" value="

name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="
&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="640" height="385"></embed></object>

It is purely a monitering tool though, you can not change any parameters within the operating system on the car. It will also show you the error codes (if you have any) of the car and the great thing is you can reset the error codes :D

You can also trend patterns with it and it has a great feature which uses GPS to overlay a race track and can trend the engines performance over the track

There are also different sensors and senders you can buy and plug into it, for example a Wide Band O2 sensor.

It will work on any car with an OBD 2 port, which as far as i know all skylines have, correct me if im wrong :)

One of the best things ever made for an iphone in my opinion and after having a play when my mates arrives i may well buy one

Enjoy :)

Link to comment
https://www.sau.com.au/forums/topic/322667-iphone-engine-obd-monitering/
Share on other sites
Hanaldo Grand Master

Hanaldo

Posted
Posted

Yeh Skylines use Nissan CONSULT. You can apparently get adapters to connect an OBD cable to the CONSULT port but i just gave up on it, too much messing around. In the end i got an ARK MFD, wires straight into your ECU

NewKleer Mentor

NewKleer

Posted
Posted
I have a OBD2 scan tool and adaptor to fit in r34 gtt but the scan tool wont communicate with vehicle at all.

I dont think r34 have OBD 2

they dont, only way your scan tool will work with any adaptor is if the scan tool supports consult and has the required consult pins on the OBD2 plug. you cant simply adapt a generic OBDII tool to work with consult, it has to have specific consult support.

apparently all cars 1996 and older have OBD 2. might not be tru for skylines though

thats what yankees will tell you. however cars made outside USA didnt have this requirement. some cars as late as 2006 in australia (patrols) still have the old consult (no OBDII compatibility). for the jap originated nissans it was generally new models starting after 99 when they brought consultII out, that were converted. i.e. s15/r34 were last of the consult models.

Yeh Skylines use Nissan CONSULT. You can apparently get adapters to connect an OBD cable to the CONSULT port but i just gave up on it, too much messing around. In the end i got an ARK MFD, wires straight into your ECU

you cant. well, you can get the adaptor but it wont do anything unless the scan tool is made for consult (i.e. an actual nissan consult II). but if it was theyd just have the consult plug/cable with it or have it as an option (e.g. greddy informeter/blitz rvit etc, has consult harness option). consult and OBDII are completely different and incompatible at every possible level (electrical, signalling, communications protocol), so no adaptor is going to make a generic OBDII thing talk to consult stuff.

Hanaldo Grand Master

Hanaldo

Posted
Posted
you cant. well, you can get the adaptor but it wont do anything unless the scan tool is made for consult (i.e. an actual nissan consult II). but if it was theyd just have the consult plug/cable with it or have it as an option (e.g. greddy informeter/blitz rvit etc, has consult harness option). consult and OBDII are completely different and incompatible at every possible level (electrical, signalling, communications protocol), so no adaptor is going to make a generic OBDII thing talk to consult stuff.

Yeh you can't get an adapter just by itself, i was talking about the Greddy Informeter Touch. My bad, should have clarified. The way Greddy outlined it to me when i emailed them was they provide you with the basic package, and if you want the CONSULT harness then you buy that extra and just connect it to the OBDII cable from the Informeter and then connect it to the CONSULT port. So effectively it is an adapter, but yes, the scan tool needs to be able to read CONSULT data

bubba Grand Master

bubba

Posted
Posted

If you want some fancy gismo that shows engine parameter readouts, build yourself a bloody carpc.

Hook a consult cable up, run Datascan and voila. You can also use it to control your entertainment system, GPS, intrawebz etc etc etc.

That would give you much more cred than some stupid brand name "infometer". Pfft.

NewKleer Mentor

NewKleer

Posted
Posted

another alternative is to get an older ipaq and run ECUTalk on it.

apple are only on the lookout for the $ so making an iphone solution would be expensive. look at the one mentioned in OP - it needs to make a WIFI access point just to connect with the phone, cause apple dont let you use the serial port unless you've bent over for them and are giving them 80% of your profits.

or just get an ECUTalk lcd display...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Duncan's V37.......race car?

      By MBS206 · Posted

      Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...