Jump to content
SAU Community

Which Builder To Go With ?

pineapple

By pineapple,
in Queensland

 Share

Recommended Posts

pineapple Collaborator

pineapple

Posted
Posted

hey guy's im posting this up because im having problems on deciding who i want to build my motor.

I have been talk to they guys at Garage101 (aka import101) and they have offered to build me a motor.

the only problem is that i have never heard of them since i am in Qld and they are in Wa

as im aiming for a 10 sec motor (i know 10secs is slow these days) and as we all know motors arnt cheap

so i would only like to go dwn this path once but i highly doubt that

so any information good or bad on these guys would be awsome

as the title says im still looking for a builder perfered in Qld but any info would be great on any workshop

good or bad

and also out of curiosity

what machining can you do to your block (bang for buck) and is a must for a bullit proof motor

any info would be great on the two topics

Link to comment
https://www.sau.com.au/forums/topic/322796-which-builder-to-go-with/
Share on other sites
Col-GTSX Grand Master

Col-GTSX

Posted
Posted

Contact Mark Jacobson who owns Godzilla Motorsport (also a trader here on sau)...

He has one of the fastest GTR's in the world and knows a few things about building drag cars as well as street tuned cars...

Mark has done heaps of work for the SAU community and has in house engine building facilities...

Most importantly he is a sponsor and is accountable for his work by the SAU community...

http://www.godzillamotorsport.com/

pineapple Collaborator

pineapple

Posted
  • Author
Posted

yas that is very true

the thing is i bought a block off them n they have offered to build it

so it would save me alot of trouble them sending the block to me

then me sending it to some1 else

dose any1 else in wa driving a 10sec car built by 101

also is any1 running Nitto internals

PHT33 Collaborator

PHT33

Posted
Posted

Dude, give Mercury Motorsport a call on 3352 3363. They are using Nitto parts throughout their 1000hp 34 gtr. They are by far the best people i have dealt with in the last 6 years of building my car. Could not speak highly enough of them and their work :)

pineapple Collaborator

pineapple

Posted
  • Author
Posted

were bout is ERD

ya i heard Mercury Motorsport using nitto gear

n all though im 7hr from brisbane i still hear of ppl sending there cars down there

ya its all good to make 1000hp gtr but are the internals realy that good

i thought it was all bout the tune these days

id realy like to hear what combo internals ppl are working for them

dose the cheap stuff work jus as good as the expensive brand

or are u better off paying that bit extra

so far i think mercury are in front

but weres all the dirty detail not ever1 gets a 100% job

pineapple Collaborator

pineapple

Posted
  • Author
Posted (edited)

lol go ERD

hahah good thing this aint a vote cause so far ERD ar in front

i would like to hear some info on mercury

i think i willl get in contact with ERD

yet on the other hand im interested in tryin the Nitto gear

and as mercury being 1 of the only workshops that use that brand

so i might get in contact with them to

Edited by pineapple
Bunta Grand Master

Bunta

Posted
Posted
lol go ERD

hahah good thing this aint a vote cause so far ERD ar in front

i would like to hear some info on mercury

i think i willl get in contact with ERD

yet on the other hand im interested in tryin the Nitto gear

and as mercury being 1 of the only workshops that use that brand

so i might get in contact with them to

ERD will build you one with what ever parts you like in it!

He may have preferences of course but with my engine he gave me a range of options and i selected which ones best matched my budget and goals

pineapple Collaborator

pineapple

Posted
  • Author
Posted (edited)

hmm since i cant make up my mind

wat do all the ppl on here think

Tomie VS Nitto

im leaning more toward tomie

what do ppl think bout boaring is it worth the money

to got 40 thou

or even 20 thou

or is the standed boar good enough

Edited by pineapple
Bunta Grand Master

Bunta

Posted
Posted
hmm since i cant make up my mind

wat do all the ppl on here think

Tomie VS Nitto

im leaning more toward tomie

what do ppl think bout boaring is it worth the money

to got 40 thou

or even 20 thou

or is the standed boar good enough

both are good, depends on your goals, you may need to over bore wether you like it or not, there is no real benefit in going out to 40thou though. Talk to builders about your goals, they will help you make decisions regarding parts

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
×
×
  • Create New...