Jump to content
SAU Community

Recommended Posts

Hi ive been told different things from a few different people and was hoping some1 could help me out..

I was wanting to know if i can get the stock ecu in my R33 gtst re mapped.. I want to get just a bit more

out of the car without the expense for now of gettin an apexi pfc.. Also if it is possible will it help stop fuel

cut problems.. every time i try to run say 12ib or so it hits fuel cut, in saying that some days it doesnt..

Any help would be great. The car has a FMIC, 3 1/2 inch exhaust, hks dual stage ebc, and an apexi BOV

if that helps. Thanks

Link to comment
https://www.sau.com.au/forums/topic/323352-remapping-ecu/
Share on other sites

The R33 ECU is a real beatch as it can't be "Nistuned"

Toshi remaps ($500 + dyno to check AFRs) are OK but unless you live in Sydney and can get him to tune them in real time on a dyno they will be a "best guess" tune for your set up.

If you do any further mods you will have to send it back to Toshi for another remap ($500?).

Don't get me wrong there are plenty of happy Toshi customers out there and he has done many of these remaps.

The Z32 ECU ($150-$300 from a wrecker) can be easily modified to work in an R33 and can take the Nistume daughter board ($300 fitted). (see www.nistune.com)

This set up (I purchased a z32 ECU modded for an R33 with Nistune for $300) can be fine tuned in real time by many reputable tuners around the country (in Melbourne see Chequered tuning (ex Status tuning)) and once set up can be easily re-tuned to accommodate further mods. The initial tune may cost $600 but any re-tunes will likely be much less.

I guess it all depends how much money you want to spend and how much flexibility you want - for me I think Nistune is the way to go but I may have thought differently if I lived in Sydney and was sure that I wasn't going to do more mods down the track (FYI - once you start it is addictive and hard to stop!!!) :D

Cheers

Link to comment
https://www.sau.com.au/forums/topic/323352-remapping-ecu/#findComment-5271930
Share on other sites

ive got a z32 nistune board they are awsome more control over power fc looks standard, i think the new editions u can even get launch control, still afm but i dont consider that a downside.

How much would u pay for a second hand one, and how much it cost to tune??

Link to comment
https://www.sau.com.au/forums/topic/323352-remapping-ecu/#findComment-5272642
Share on other sites

good luck finding a second hand one i paid $950 fitted drive away for mine. road tuned for abot 4 hours as it was a sunday lol, mild tune only 14 psi got z32 afm and injectors so goin back in a few weeks to put it on the dyno.

i think u can get them for 500 bucks new if u knom how to fit them

Link to comment
https://www.sau.com.au/forums/topic/323352-remapping-ecu/#findComment-5272658
Share on other sites

no i didnt tune myself i got it done profesionaly, i held the lap top and drove ocasionaly haha. its all real time tuning as u drive in 2d and 3d maps. u can adjust everything from ignition timing, fuel maps, they control biger in jectors, change injector pulse, bigger turbos absolutly evey thing apart from boost. fully tunable ecu without the wank factor brand name

Edited by blaikier33
Link to comment
https://www.sau.com.au/forums/topic/323352-remapping-ecu/#findComment-5272692
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...