Jump to content
SAU Community

Rda Clutch Kit R34gt-t

BASHO
 Share

Recommended Posts

BASHO Mentor

BASHO

Posted
Posted (edited)

Just sold my R34GT-t and have this beautifull BRAND NEW RDA R34GT-t clutch kit which I thought I needed but turned out I didn't and now I don't :) , this kit has a EXCEEDY friction plate so you know it's aquality item.

Out the door at cost --how good is that ?? ONLY $490.OO + P&P (It wieghs 9KG pickup postcode 4212)

clik pic once to enlagre clik again to supersize.

rdaclutch.th.jpg

Edited by BASHO
Link to comment
https://www.sau.com.au/forums/topic/323728-rda-clutch-kit-r34gt-t/
Share on other sites
BASHO Mentor

BASHO

Posted
  • Author
Posted
What sort of power will this hold?

I have no idea, it was bought for a stock R34GT-t , it's an Exceedy friction plate and it's an RDA kit so the rest will be at least OE quality, if you're looking for a clutch that you're gonna kick the shit out of I suggest doing a search on here , there'll be plenty of recomendations , all starting at round abouts the $1000 mark and keep counting , if you're looking for a good honest clutch kit at a bargain price you've found it.

:laugh:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...