Jump to content
SAU Community

Recommended Posts

Thanks Guys,

Is it possible to put Kicker KS600's in front and rear? These speakers are 6". I have one last question is it possible to install them so that you can see the speaker? Like in this picture: http://gallery.viperclub.org/data/500/k2.JPG . Thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/324084-speaker-sizes/#findComment-5283692
Share on other sites

  • 2 weeks later...

i just took my 6.5 kicker splits out of the front and put them into the back spacers, no modding needed. replaced the fronts with better splits but same size and had to trim the speaker pods a lil bit. like a 5 min job for both...

Link to comment
https://www.sau.com.au/forums/topic/324084-speaker-sizes/#findComment-5302055
Share on other sites

Thanks for that guys,

One last question (well I think it's the last anyway :cool:) as I'm not very good with car audio stuff would just like to know if I put Kicker KS600's in front and rear (or maybe the 6x9 version in rear) would I need an amp? Also how do you work out what power amp you would need to provide sufficient power to the speakers?

Sorry for all the questions, Tristan.

Link to comment
https://www.sau.com.au/forums/topic/324084-speaker-sizes/#findComment-5306253
Share on other sites

i would get an amp on to those KS600s as they are about 65RMS and your headunit only puts out about 12rms lol. waayyy underpowered. a perfect amp for those would be a kicker ZX350.4 which is 4 x 60rms and is perfect to run the KS series speakers. have u already got the 600s? as i would get the KS602's which are the same but in a split and go the KS600s for the rear as they are a 2-way.

Link to comment
https://www.sau.com.au/forums/topic/324084-speaker-sizes/#findComment-5306528
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
×
×
  • Create New...