Jump to content
SAU Community

Recommended Posts

top quality cars top quality price

i haven't heard anything else so if your gut it ok then go for it

don't bother with the 3 yr extended warranty 95% of what could go wrong with the car isn't covered it should take about $900 off the cost

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282389
Share on other sites

about 7 years ago there werent very good stories but from what i have heard over the past few years has been really good reps as long as the car checks out with a mechanic then go for it but i agree with steve dont get the warranty there is no point and it will save you a few $$$$

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282429
Share on other sites

People say that they have heard bad stories from Redline. But my R32 was sold by them back in 2002, and Vince from Import Compliance Systems has been over it and said its one of the the best GTSt's he has seen to date... Would I buy a car from Redline? Yes.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282487
Share on other sites

Ok, first of all the topic title "Dealer" is just stupid - you need to make the title state exactly what the topic is about, and what you want to ask.

Secondly this has been covered 1,000,000 times before .... ALWAYS use the search function.

Thirdly, the guys selling at Redline have always struck me as arrogant fools, and the cars are stupidly overpriced IMHO.

That is all.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282534
Share on other sites

What are peoples impression for Redline Motorsports?

I'm looking at buying a car from them tomorrow!!!!!!!!!!

What car you after exactly? Id trowl through car sales and call a few that you like (interstate also), always ask the relevant questions ie service history, auction papers, export certificates etc

If you have a good feeling then organise an inspection through a mechanic, RAA or state roads depending on where the car is located. All goes well, seriously think about purchasing.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5282604
Share on other sites

Paid top price for my 33 through them.

Had to go back twice for majour warranty repairs, both times the repairer tried to sell me on extras and both times the repairs were not carried out to satisfaction.

That being said they gave me a lot more for my trade-in than I was expecting, and the guys provided great pre-sales service and reasonable after-sales, car was presented very well and I suspect it had a cheapo respray after landing here which is now starting to flake in some spots, although I can't say for sure that was thanks to Redline.

Link to comment
https://www.sau.com.au/forums/topic/324136-dealer/#findComment-5283550
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Kittens in first to claim dominance of the residence, then puppies later From past experience, the other way around can be problematic to say the least  Those weird "Dobby looking"  little kittens are not cheap....LOL
    • At least yours have parkour down pat. One of mine will still trip over his own shadow and fall over... He's a special type of cat... Ha ha ha
    • The question then becomes - was there any fluid coming from that hole before you did the rebuild ?    You may not have noticed, of course.   Depending on how you did the rebuild, the possibility has to be considered that somehow (cleaning ?)  fluid entered that hole and is now being 'forced'  out by small movements of the proportioning valve.   From the factory, there's actually a small rubber plug in that hole but with age and under-bonnet heat it's quite common for it to 'go missing'.  That rubber plug is designed to allow the venting process but also to prevent 'stuff' getting to the area (prevent corrosion, etc).   The plug is also not available as a spare part AFAIA. Personally I wouldn't race and buy a new master just yet but keep an eye on the area to see if the 'leak' continues.   If you're concerned about brake fluid damaging nearby paintwork, cable tie a piece of suitable absorbant material over the hole and remove/monitor occasionally.    Operation of the proportioning valve and the brake master itself won't be affected, but also keep an eye on brake fluid level, of course. In terms of a new master, the genuine part is getting expensive, unfortunately.  Amayama is showing AUD900+.   I was searching recently and there's an aftermarket part available from Japan made by 'Parts Assist': https://zenmarket.jp/en/yahoo.aspx?q=BNR32%2bBM50&p=1 Whether it's any good I have no idea, although in my experience Japanese aftermarket stuff is pretty good quality-wise.   The above site allows overseas buyers to purchase stuff more easily from Japan but there are fees and shipping costs, of course.   The original Japanese seller page is here: https://auctions.yahoo.co.jp/jp/auction/p1197401228 Copper/Nickel is fine but I still prefer bundy tube and it's also cheaper.
    • Your chihuahuas look weird!
×
×
  • Create New...