Jump to content
SAU Community

Recommended Posts

Hey guys just wanted to know.... if i a buy a tow-truck(towing cars)what would be the things i need?

Do i need a Medium or Heavy Rigid license?

Do i need any speicial licence if i wanted to start as my own business?

cheers, if anyone here has any tow-truck experience let me know cheers, i want to get into the industry...

Geraus.

Edited by geraus
Link to comment
https://www.sau.com.au/forums/topic/324406-thinking-of-buying-a-tow-truck/
Share on other sites

Research the industry. Make sure it's something you really want to do.

I've known a few towies and it certainly takes specific types. It's a pretty shitful job.

If you do decide it's for you, then the license required will depend on the tow truck you want.

If you are doing heavy towing then I think you will need an MC license. You can drive the trucks on a HR license but once you have something on tow you need an MC.

If you just wanna do cars with a tray truck, you will only require an MR license.

Gimps idea is a very good one. Try and land a job with a tow company and see how you go.

i was actually discussing this with my old man few weeks back. i think it operates the same way as a taxi licence (ie. big money up front)

http://www.vicroads.vic.gov.au/Home/Morein...uckLicences.htm

Well i spoke to vic-roads , all i need is a light regid licence, but im going to go for my heavy just incase for the future. The tow truck is under 6tone, it can tow cars as well but not at accident scenes. im going to be using this tow car to transport cars to mechanics etc. Cheers for the help guys, and if i get this truck i will be more than happy to help SAU out with towing cars :/

We asked the second last towie I used (my car gets towed a lot...lol), the normal tray-back Nationwide tow truck he had only required a Medium Rigid license to drive however get the Heavy Rigid if you're going for your license so you're covered to drive a bit larger than that.

http://www.vicroads.vic.gov.au/Home/Licenc...ecategories.htm

there is an SAU member who runs a tow business. Jack aKa JAGR33 http://www.skylinesaustralia.com/forums/JAGR33-m1569.html

im sure if you send im a pm he can give you allt he info needed.

Research the industry. Make sure it's something you really want to do.

I've known a few towies and it certainly takes specific types. It's a pretty shitful job.

If you do decide it's for you, then the license required will depend on the tow truck you want.

If you are doing heavy towing then I think you will need an MC license. You can drive the trucks on a HR license but once you have something on tow you need an MC.

If you just wanna do cars with a tray truck, you will only require an MR license.

Gimps idea is a very good one. Try and land a job with a tow company and see how you go.

MC = multi combination = B double, gotta have a rigid license for 12 months then get a HC = heavy combination = semi then you can get an MC license, defenately more than he needs.

Well i spoke to vic-roads , all i need is a light regid licence, but im going to go for my heavy just incase for the future. The tow truck is under 6tone, it can tow cars as well but not at accident scenes. im going to be using this tow car to transport cars to mechanics etc. Cheers for the help guys, and if i get this truck i will be more than happy to help SAU out with towing cars :banana:

Another vic roads nufty that does not know what his talking about, no such thing as a light rigid license, there is only an MR = medium rigid = single axle at the back and HR = heavy rigid = twin axle at the back, with the HR you can get one with the conditions of auto, synchro and non synchro gearbox, non synchro is a lot harder and i have only ever seen 1 rigid with a non synchro box.

An from what i know of a tow truck license there are two types, the hardest one to get is one where you see TOWxxx on the trucks number plates, these are able to attend accidents and tow damaged cars, the other is just a normal rigid license but you are not allowed to tow from accidents, purely car transport.

And if you want to add a tow bar and tow a trailer as well then you can do that on a MR or HR as long as the gross of the trailer is 9 ton or less, over 9 ton and you need a HC.

My brother just did his Heavy Rigid license in a crash box (non-synchro), was telling me all about it. Sounds ridiculously difficult. Passed with flying colours and he'd never driven one before.

Its all about timing, matching road speed and revs to the gear your changing into, makes me laugh to see a couple of people on here saying that its easy cos they double clutch there synchro box with out a problem, not so easy in a non syncho where you only have a few hundred rpm to get everything right or your screwed.

MC = multi combination = B double, gotta have a rigid license for 12 months then get a HC = heavy combination = semi then you can get an MC license, defenately more than he needs.

My bad, I meant HC.

yes there is...? pretty much minibus specific though, no trucks as such (so i'm lead to believe)

well there ya go, they have changed shit again, looks like its basically the same as an MR but less weight and you cant tow a trailer, also now you have to have had a car license for 2yrs before you can get an HR license.

http://www.vicroads.vic.gov.au/Home/Licenc...ecategories.htm

Yeh , the tow truck i found i want to buy is a small banna back one. Still doing my research.. thanks for info guys.

Think twice about the Banana back.

lowered cars are very hard to put on them.

Spend a bit more money and get a tilt tray you would be better off.

Also look in to repo companys for work..

Thanks for the advice guys, i looked at this truck today it was pretty clean, took it for a drive and all runs good,looked at the motor and all as well. the ramps are really as well. Think i might try and get this truck! hmm what do you guys reckon? Tilt tray is to much for me, im gona start of small then try and get a tilt tray

img0673rv.th.jpg

Uploaded with ImageShack.us

img0672o.th.jpg

Uploaded with ImageShack.us

lol@ the company name.

We have one of these isuzu's (or one that looks pretty the same) at work, it had lots of problems with snapping exhaust manifold and turbo studs, even after everything was pulled off and decked, dont know if ours was a lemon or its a common problem, it now sits in a paddock.

I see it already has a tow ball so you can add a tandem and carry 2 cars at once, the point about low cars is a good one but im your you could use another set of ramps to flatten the incline a little.

Do you already have a connection in the industry to get work through, that would be the biggest decider, if the works there then why not.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...