Jump to content
SAU Community

Recommended Posts

  • 1 month later...
  • Replies 50
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

  • 9 months later...

Been a while,

clutch fixed, replaced a piston and head gasket, custom surge and breather tanks, 3x bosch fuel pumps ready for E85.

scored some series 2 taillights as well

Edited by RED513
  • 4 weeks later...
  • 3 weeks later...

pics? :rolleyes: Your 32 is really coming along nicely. Congrats on a really keen car mate

No pics as its messy atm

Trying to track it for some sprints but motor keeps smoken.

Bought a spare head last weekend, In getting full reco with mild port job,

Just undicided on bottom end??? 25, 26 or 30??? Do have spare 25 block which has been tapped/drilled/cleaned, ready for bore/forgies.

All comes down to money!

Edited by RED513
  • 2 weeks later...

go the 30 :ph34r: , pics of your car all messy , i wanna see what you did with the 2d skirts

RB25 still has 160psi across all six, valve stem seals ??? (no smoke when boosted below 4k rpm)

Spare head being built, mild port job, full reco, gtr cams, solids and valves, no vtc. Will restrict oil supply, drill block and head oil returns whilst off, external return kit.

Just keeps going! lol

  • 1 month later...
  • 3 weeks later...

This is one tough 32 four door man. Love the GTR bonnet n grill combo on foru doors.

The '25 with the 3037S is tits! Nice man, love what your've done.

Keep up the good work!!!! :)

Thanks mate, step 1 RB30DET nearly ready just needs assembling

So far:

Rb25 head. light port, drillled, full reco, std cams, no vtc

RB30 Block, std bore, restricted, drilled and debured.

Crank collar, grub screw, linish and balance.

std pistons and rods, new rings,

new acl race main and rod bearings.

new N1 oil pump and waterpump.

genuine gasket set and cometic headgasket.

  • 3 weeks later...

RB30DET running :nyaanyaa:

Rb25 head. modified, drillled, full reco, no vtc, 20 inlet cam, 25 exhaust cam, dayco 94407 timing belt,

RB30 Block, std bore, restricted, 1xhigh/1x low tensioner, drilled and debured, genuine gasket set, 1.2mm cometic headgasket

RB30 Crank, collar, grub screw, linish, std pistons and rods, new acl race rings, main and rod bearings.

New N1 oil pump and waterpump, Greddy oil cooler and relocator, Greddy style manifold, 850cc, 2x 044 pumps, 1x 040 intank pump.

Still running GT3076 .63 with 38mm tial gate under manifold & same tune from rb25.

Going to move gate and plumback with new stainless dump then tune on E85.

Gold Coast 4 door <3 :D

We have 3x skyline 4 doors:

Mine, R34 4door and another R32 4 door, all highly modified

Pop in anytime:

FFF MOTORSPORTS

5/14 bailey crescent

Southport, 4215

Matt 0414 233 005

Edited by RED513

We have 3x skyline 4 doors:

Mine, R34 4door and another R32 4 door, all highly modified

Pop in anytime:

FFF MOTORSPORTS

5/14 bailey crescent

Southport, 4215

Matt 0414 233 005

Yeah nice!

Sounds good. should be on the road within the month ;)

i got a build thread in the build section.

have a good one.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...