Jump to content
SAU Community

Recommended Posts

hey guys,

its all finally coming along with my suspension needs. having just sourced some drag radials and in the midst of combining a soft shock/spring combo and then finally ordering a 1.5LSD, ive started to think about what i can do to make sure drive shaft components stay together, or at least try to :rolleyes:

Don't know much about it but i was wondering;

How does the gearbox, tail shaft and other important components hold up with a 500hp rwd vehicle? what are the common weak links in a r34 gtt. and what should i be focusing on?

the car currently has a Nismo Coppermix Twin Plate which is mroe then enough for the 500hp.

p.s: the car is staying MT

any help much appreciated.

Link to comment
https://www.sau.com.au/forums/topic/325847-driveshaft-upgrades/
Share on other sites

Two of these puppies for starters.

post-12712-1277176984_thumb.jpg

Diff and tailshaft don't usually have trouble. You have, are going to upgrade the diff center anyway.

Not sure if the 6 bolt flange on the GTR shafts will bolt up to the GT-T halfshafts that slip into the diff though.

thanks for advise sean,

apologies for the dumb questions but what exactly is that? is that the center diff? how much do these fetch for? and where can they be sourced?

dont aftermarket companies make these sorts of stuff?

how do the Rb25 gearboxes hold up?

Edited by Jap_Muscle

I know that some people put in a whole GTR rear cradle that has all the diff, shafts etc already there, Abo Bob is one member that has done the GTR upgrade, so he would be more helpfull with the details.

The 25 box is basically the same as a late R33GTR gear box so they are pretty strong, especially for RWD. Only weaknesses are third gear and synchros at high rev fast shifts.

Os giken and Par etc are a couple of gearset upgrades available.

http://www.skylinesaustralia.com/forums/R3...html&hl=gtr

http://www.skylinesaustralia.com/forums/Gt...html&hl=gtr

http://www.skylinesaustralia.com/forums/Di...html&hl=gtr

Buy complete r32/33 GTR rear cradle.

Use the axles, hubs and diff out of it .

Throw the rest in the bin.

If you want a 1.5 way you will have to get that done at same time.

Fairly easy exercise. Wont need to worrie about breaking axles again.

I have just done the conversion into my R34 GTT

Buy complete r32/33 GTR rear cradle.

Use the axles, hubs and diff out of it .

Throw the rest in the bin.

If you want a 1.5 way you will have to get that done at same time.

Fairly easy exercise. Wont need to worrie about breaking axles again.

I have just done the conversion into my R34 GTT

This is the right answer.

I paid $700 from a mate for the the lot from an R32 GTR. My traction control stopped working, and presumably the ABS, although the rear isn't really a problem in most ABS needing situations.

I did it because I snapped a drive shaft.

you would probably wanna upgrade sway bar and traction brackets etc... rb25 box's are probably the strongest outta skyline boxes.... tail shaft will be fine... ur diff on the other hand might not last too long... if your serious and have the $ to back ya idd go borg warner 28 spline or 31 spline diff outta vl or r31... they run 9's in em just fine so you'd think they'd be good but you needa modify/change the brackets etc...

can the billet gtr driveshafts that hi octane fit into the rear without having to mod everything? from what ive seen they come as just the splined shafts

sorry just following up on this

if i put a gtr rear cradle in my car with a gtr 1.5 way diff can i use the hi octane billet drive shaft set

im in the same position as the op just with a shit load more power.

and ill be using the 25 box with os gearset inside it.

  • 4 weeks later...

^ be good to know that as wel. those babies look tough as.

i had a chat to SydneyKid (gary) not long ago and i remember him sayign that the R34 GTT already had GTR hubs and axles when Nissan built them?

i might have misheard but i do remember him saying the GTTs had similar drive train components to the GTRs. can anyone confirm what?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...