Jump to content
SAU Community

Recommended Posts

hi guys, she lives.

spec is as below with power figures

rb30 block

fully home ported rb26 head

1.6mm cometic h/g

cp forged slugs 8.3.1

spool gen 3 rods

tomei oil pump

ati 1000bhp front damper

acl race bearings

hks step 2 cams 272/in 10.2mm lift 280/ex 10.2mm lift

os giken r4c clutch

gt4094r turbo

6 boost manifold 50mm turbosmart gate 4" dump + 2"screamer

std box, with giken centre plate and cryo treated gears

power is at the hubs

470kw,s @ all 4 wheels @ 1.5 bar

530lbs @ all 4 @ 6600rpm

full boost by 4300rpm

will post graphs and a small dyno clip soon.

car was dyno on a hub dyno in 50degree temps, its warm here at the moment.

Edited by rockabilly
Link to comment
https://www.sau.com.au/forums/topic/326066-my-rb2630-lives/
Share on other sites

well she,s back on the road, new bottom end, spool rods, tomei oil pump,cheers rick @ endless, new at 1000bhp damper,cometic 1.6mm h/g, hks step 2 cams, fully ported head by me.lol.

graphs and a little dyno clip of the old girl winding up..

thanks th garth/mark @ mgt for all there help in installing and mapping the link g4, superb ecu for driveability, not may cars tickover so smooth with this power..

figures are at the hubs.

640bhp @ 1.5bar boost

530 lbs @ 6600rpm.

bernie.

th_RB26-30DYNOMGT.jpg

IMG_0918.jpg

IMG_0917.jpg

IMG_0916.jpg

IMG_0915.jpg

IMG_0914.jpg

Link to comment
https://www.sau.com.au/forums/topic/326066-my-rb2630-lives/#findComment-5309372
Share on other sites

great to hear bernie :D

what boost level are u planning to run or u sticking with 1.5bar?

oh & what is that thing sitting above the intake lol - when i 1st looked at your clip i initially thought it was a pisstake as it looks like a MASSIVE turbine!

Link to comment
https://www.sau.com.au/forums/topic/326066-my-rb2630-lives/#findComment-5309420
Share on other sites

hi marko, we tried higher boost but made no more power just slightly more torque?. but temps in the booth were 50deg as it was 30 deg outside, the extra turbo was to keep the plenum below 50degrees on the runs..lol. maybe because i am still on the original plenum its restricting it.. but it goes well.lol..very well....so for the moment leave as is.. just to add, the motor had done 45 miles on 10/40w semi synth oil, then dropped and fully synth added and dynoed...done 160 miles now ..........

Link to comment
https://www.sau.com.au/forums/topic/326066-my-rb2630-lives/#findComment-5310545
Share on other sites

hi marko, we tried higher boost but made no more power just slightly more torque?. but temps in the booth were 50deg as it was 30 deg outside, the extra turbo was to keep the plenum below 50degrees on the runs..lol. maybe because i am still on the original plenum its restricting it.. but it goes well.lol..very well....so for the moment leave as is.. just to add, the motor had done 45 miles on 10/40w semi synth oil, then dropped and fully synth added and dynoed...done 160 miles now ..........

ive always wondered what an aftermarket single throttle body intake plenum would make in terms of gain...does anyone have this data (i.e. before & after test)?

im also using the factory intake plenum :)

Link to comment
https://www.sau.com.au/forums/topic/326066-my-rb2630-lives/#findComment-5310812
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...