Jump to content
SAU Community

Recommended Posts

Yo!

Has anyone replaced their Drivers side Door lock themselves?

If so, has anyone replaced it with an Infiniti G35 part rather than the Japanese V35 part?

I beleive they are not the same/compatible but not 100% sure as yet...

I have the USA part and the JAP part will be here in 1 week.Riverside swear they have sold some over here in AUS with no problems.

Link to comment
https://www.sau.com.au/forums/topic/326951-door-lock-actuator/
Share on other sites

don't

USDM Infiniti driver side is on the opposite side. if you order US parts there will be no provision to hook up the lock actuator to your driver side lock barrel properly, because they'll give you the USA's passenger side.

READ the DIY I wrote up here (it's for passenger side but for driver side you just do the mirror of that side)

http://www.skylinesaustralia.com/forums/Di...ua-t315036.html

contact www.japanparts.com and order the appropriate part number below. yours a coupe too?

Parts

- Genuine Nissan Door Lock Actuator.

- V35 Coupe Left: 80501-AM81A

- V35 Coupe Right: 80500-AM81A

- V35 Sedan - please ask I can find out from NISSAN FAST

thanks a ton rs73.

I had alot of trouble replacing the handle and door lock after finding the parts to be different.Its getting the handle back in with the key barrel which is super hard.I spent almost 4 hours in total.

Your guide is great compared to the crappy 1 page diagram in the service manual!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...