Jump to content
SAU Community

Recommended Posts

Hey guys,

Beforehand let me say I'll be doing manual swap on the daily Ceffy as soon as I've got all parts ready to go, but until then my auto box is getting a little bit confused.

9/10 it will start up, flash only the HOLD light, as it drives it will take off from second, and only use second and third gears, switching to HOLD will light it up on the dash, switching to POWER doesnt light up on the dash and driving stays the same.

Even in this mode of driving, selecting 1 with the selector, it uses second gear only, 2/D/D w/ OD off, uses third, even at 120kmp/h +

Sometimes however, it will start up, flash both lights, and use all gears, obviously HOLD works as per normal, and POWER does work.

Power/all gears working doesnt sem to be temperature related, works hot and cold if it wants to. Once it starts with power, it stays that way, it doesnt lose the gears.

Have replaced the hold/power switch, and checked the computer, nothing.

I'm assuming this is an eletrical issue, somewhere between the switch and the computer, or post computer, telling it to STAY in second and third only, for some reason, believing it is being told by the switch that it needs to.

Suggestions on where I can look to quick fix this ?

Could be resorting to this car as daily driver, so having all gear ratio's will be incredibly handy for fuel economy (4th gear at 100 is 2300rpm :bunny: )

Link to comment
https://www.sau.com.au/forums/topic/327422-eletrical-fault-with-auto-gearbox/
Share on other sites

Make yours manual and cut a sunroof into it, and I'll consider.

f**k taking it to a workshop, especially a jap work shop, even if they sponsor hot young females like Carla.....flamin mongrels will be all like "aww but the ceffy is pretty rare, this'll be a hard one to fix, 9 hours labor, and you'll need new spark plugs too, thats $200 because we have to order them from Japan"...you know its true Rowan!

No.

More suggestions please :bunny:

Gearbox seized up this arvo.

Manual gearbox in the Ceffy in the shed dropped half its oil supply out of the output shaft on attemped removal.

Floor jack slipped, denting in oil sump on 20DET, and droping entire engine+gearbox weight into steering rack and lines.

Ready to throw in the towel again.

:whistling:

  • 2 weeks later...

OK gearbox problems were independant, as for gear selection (or lack of) is ANOTHER problem.

Narrowed engine problem down to crank angle sensor.

Couldnt find an RB20E CAS so I got a RB30E CAS but doesnt fit RB20E dizzy, SO I'm on the hunt for an RB30E dizzy (you think theyd be easy considering the number of busted VLs and RB30DET builds getting around)...if the problem isnt fixed by next weekend, it'll be getting a new motor and manual conversion, thanks for a dangerously cheap factory turbo manual C33 Laurel halfcut that is for sale locally (if I cant find the little problem, i'll flush the f**ker out with a whole new running gear!!)

But on a good note, the ceffy has a black interior the whole way through and I fitted a manual handbrake (with centre console and matching trim)....feels awesome sitting inside now, if only I could actually drive it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...