Jump to content
SAU Community

Recommended Posts

Hey i have a full alarm fitted to my car but the other day it got broken into, the only thing taken was my morphine tablets which i just picked up from the chemist, i suspect someone was watching the chemist. Anyways they used 2 coat hangers joined together and slipped it in between the side window and the door rubber and it had a hook on the end which they used to catch the door lock from the inside, now that would have been hard to do bec i tried to do it and it took me ages, the alarm went off but it wasnt on for long b4 i got to it so im thinking the ultrasonics didnt work. Im so gutted, out of everything they could have taken from inside the car that was the most precous to me, its going to be almost impossible for the doc to give me more cos there an authority script. Anyone know how ultrasonics work exactly and how they should be possitioned properly so this can never happen again ..

Link to comment
https://www.sau.com.au/forums/topic/327526-ultrasonics/
Share on other sites

Well considering it takes all of about 10 seconds for someone with reasonable skill to do that - I'd probably say whoever it was was simply experienced.

Just because you cannot do it that fast, doesn't mean it cannot be done :whistling:

I used to be able to get into an bomb old car of mine, my first car.... who's lock loved playing up... in about 20 seconds.

Link to comment
https://www.sau.com.au/forums/topic/327526-ultrasonics/#findComment-5328421
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Or, the height of the release bearing is not correct for your combo. Start with the bleeding and checking the slave moves throughout its range when you press the pedal (2 person required), but it is possible for the height to be internally wrong too (box back off to measure.
    • Yes, there's quite a few things that can go wrong during a clutch install. Very unlikely. I have a similar clutch. They (ACS) make good gear. No, it is not normal. It is possible that you just need to bleed the clutch slave. But the new clutch will also have a more aggressive actuation force/pressure, and so your old slave cylinder might be a bit leaky or otherwise compromised, and not up to the extra force required. Or the master cylinder, same.
    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
×
×
  • Create New...