Jump to content
SAU Community

Recommended Posts

Hello my Fellow V owners, i recently came across the complete pdf version of the workshop manuals for the v35, ther is a manual for each year and model ie coupe and sedan

They cover everything and are very informative.

I Have uploaded the 03 sedan and coupe first as its a free site so kinda slow, ill get to the rest later

http://www.4shared.com/file/XbBmjjrn/2003_COUPE.html

http://www.4shared.com/file/uEUBf9um/2003_SEDAN.html

u have to wait 90sec for the dl to start,

if u know of ne better FREE file sharing sites please let me know and ill upload the rest when i get some free time

Hope you all enjoy .

*edit* i winRAR'ed these files to make them smaller u need winRar to extract, goodle it if u dont have it already oh and PDF so Adobe would help to :P agian enjoy

Edited by Dan85

Cheers mate. Took me about 2.5 min to dl.

Havent had a chance to look as yet but will definately peruse it later tonight.

Ill see if i can make it a torrrent tonight as well.

WAnt to see if they have info on the CVT in here.

Cheers again!

hate to be the bearer of bad news those are the USDM ones..

the jap ones I have acess to and they are quite different.

are the ones u have in Japanese ?

also ill get to uploadeing the other years later tonight if i can

Edited by Dan85

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...