Jump to content
SAU Community

Recommended Posts

Hi Guys,

I recently got some new rims so i decided to get a wheel allignment. I took my car to pedders and after 4 hours they told me they couldnt do the wheel allignment!

They said my front upper ball joints need replacing, although I feel it drives fine. Would i notice it? Plus one of my mate recons it doesn't have upper balljoints.

They also said my rear tyre rod sockets need replacing.

What do you guys think? can you guy's help me out here.

thanks

Mark

Link to comment
https://www.sau.com.au/forums/topic/32857-32-upper-ball-joints/
Share on other sites

I'm not sure about the GTSt, but my GTS4 (and the GT-R) certainly doesn't have upper ball joints. It has upper control arms, and the bushes eventually wear out, giving too much camber, and unstable control during driving.

As for the rear - they are tie-rod ends - could be knackered. They are mechanical parts that don't live forever.

Take it over to Traction in Rowville for an honest appraisal of what's wrong.

Hi guys on R32's the upright rotates to enable steering. They have a ball joint at the bottom of the upright where it joins the lower control arm. At the top of the upright it has a swivel joint (not really a "ball joint") where it joins to the upper control arm. I have never seen a swivel joint worn, they are very big and strong, but I guess it is possible.

Hope that helps

  • 2 weeks later...

My car has been making a knocking noise in the front passanger side of the suspension, so took it to Pedders today (basically because they were going to check it for free). They told me the same thing, they said the upper bushes had already been replaced, the lower castor bushes were cracked and needed replacing (they actually got me under the car and showed me this), they said the cv boots needed replacing (they showed me this too), and said the knocking noise was coming from worn upper ball joints. Ive also got the printout of the car on a shock tester machine, and even after 70,000km's, theyre still going fine (was told it looks like they were rebuilt not too long ago).

Just thought id add this as I read above R32 GTR's dont really have upper ball joints, but what made me respect the guy at Pedders is he actually reccomended taking the car somewhere else to get done, as theyve never done one before at this particular workshop, and couldnt quote me a price on labour.

On that note though, does anyone know where I can get replacement bushes, cv boots and these "upper ball joints" Pedders are speaking of?

Hi Amaru, Whiteline have polyurethane bushes, cv boots and upper ball joints you can get from a Nissan dealer. I stand by what I posted earlier, Skylines don't have upper ball joints. The joint where the upper control arm meets the upright is simply not a ball. It is a swivel joint. A ball joint works for 360 degrees (ie; in all directions). On the Skyline the joint only allows rotation of the upright, it is like a hinge on a door.

I have never seen a Skyline with any wear in that joint, even at triple the no of k's your car has travelled. They do wear both the inner and outer bushes on the upper control arm a lot, almost every Skyline I have seen has worn bushes.

Bushes and cv's are not expensive, but I don't believe the swivel joint alone is replaceable so you would have to buy complete uprights, they won't be cheap.

Whiteline have agents in Canberra, this is their web site, I think it has contact numbers on it.

www.whiteline.com.au

Hope that helps

Hi Sydneykid, thanks for this. When it was checked, the guy said all the upper bushes had already been replaced and they looked pretty new (ive only had the car for 5000kms).

I will however take the car to a skyline specialist (amazingly yes, there is one in Canberra :D ) and see what their opinion is. What else would cause a knocking noise (something physically hitting something else) in the suspension area, but only really at low speeds and intermittantly? I went to get it checked before it became a permanent noise and cost me the world.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...