Jump to content
SAU Community

Recommended Posts

So, I've got an R32 GTR and it's playing up a little in the colder weather. I thought it was tune related as there was a cold start problem, but Trent has given it more fuel and that problem has gone now. Essentailly the residual problem is now whilst the engine is cold and under light throttle it seems to miss or hestitate a little.....It might be 4th gear 60km/h even throttle. Always sorts its self out once warmed up. No problems under power.

Now it has new plugs, new coilpacks, -7s, Nistune and as Trent had it hooked up to the computer only late last week I'll assume all is well with the tune side of things. The engine is healthy as a recent compression test showed 165 across all cylinders.

Any thoughts as to what may be causing this?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/
Share on other sites

could be the ECU pulling fuel out in closed loop and there is a cell thats not quite inline with the others and its a little lean, mine was doing this before, leans out going through/sitting on a particular cell and the ecu isnt fast enough to add fuel back in on closed loop and it splutters a bit as though its missing. once warm and out of warm up enrichment the problem went away.

does it always happen at the same revs with similar load?

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5347848
Share on other sites

could be the ECU pulling fuel out in closed loop and there is a cell thats not quite inline with the others and its a little lean, mine was doing this before, leans out going through/sitting on a particular cell and the ecu isnt fast enough to add fuel back in on closed loop and it splutters a bit as though its missing. once warm and out of warm up enrichment the problem went away.

does it always happen at the same revs with similar load?

It's not that precise in terms of how it happens. Since the cold start issue has been resolved it starts nicely / normally and idles fine. Its after you've pulled away and given it a couple of gears and even out to a cruise that it starts. Yesterday was the worst it's been. I was driving home from work and it was about 10 degrees ambient. I have a short drive from my car spot to a set of lights and at the lights it nearly stalled. Idle was unhappy. Got going and it did it's stuttering thing until the temp gauge started to register. All was good from there.

So you're thinking it's tune related and not mechanical by the sounds of things.

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5347919
Share on other sites

Could that be why my heater doesn't run full hot? I think you posted in my thread about that too.....

Different issue, the coolant temp switch is responsible for reporting the coolant temp to the ECU, if faulty it might be reporting the engine is fully warmed up when it isn't

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5349381
Share on other sites

^ yeah it will be in the cold start tune. o2 feedback is only used when at running temp

mine was tuned at UniGroup by Yavuz and he confirmed car is left on dyno overnight so he can tune for cold start the next morning, anyways, he will look at it for me soon and will report back what the issue was

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5349662
Share on other sites

mine was tuned at UniGroup by Yavuz and he confirmed car is left on dyno overnight so he can tune for cold start the next morning, anyways, he will look at it for me soon and will report back what the issue was

Well, mine was left overnight too. Twas 4 degrees and it was looked at stone cold, first thing in the morn.

Link to comment
https://www.sau.com.au/forums/topic/329009-winter-blues/#findComment-5349767
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...