Jump to content
SAU Community

Recommended Posts

Hi all

currently stripping an entire r33 2door.

Enigine is already sold

gearbox/tailshaft/crossmember/clutch/slave cylinder/clutch pedal all unavailable too

brakes/hubs/handbrakes sold pending payment

ecu/loom/fmic sold

All other parts are available-

car has been rear ended on back rhs and rear bumper and rhs light are unsalvagable

all panels seem to be dent free and in very good condition

chassis has done 155555kms

comes with stock r33 rims not rims In photos

i have stripped most of the parts already to be parted out,and this following week the entire car will be stripped-shell is registered and not written off and has plates-damage is fixable-if anyone wants a stripped shell with legit plates-

I intend on uploading photos of damage and most parts tomorow for public viewing.

Postage can be arranged for some parts-reluctant to organist large panels etc to interstate as it's a lot of messing aroun for me,but can be organized at buyers cost. Would prefer pickup.

Best to contact me via mobile text on 0419837474 for items. I work long days and can return a text or call when I've finnished, may not get to reply to a pm straight away so mobile prefference Thanks!!

Located Adelaide hills

photos to come asap!!

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

front seats sold pending payment, steering wheel sold

rims in photo of complete car also for sale now

car is mostly stripped so most parts are good to go, havent pulled the rolling parts out yet.

can seperate electric from doors if necessary (ect. mirrors, trim, controls)

can remove heater box also

boot an spoiler for sale together, probably make a mess of the boot pulling it of cos its glued on aswell!

Available

Bonnet

lhs front gaurd

rhs front gaurd

front bumper with indicators

front bumper reo

lhs front headlight

rhs front headlight

front grille

gaurd orange indicators

dash with vents

center consol

dash surround

heater/aircon control

heater

rear seats

entire floor carpet

roof lining

center roof light

map lights

holy shit handles on roof

lhs a pillar

speedo cluster

glovebox

all seatbelts

sun visors

rear lhs tail light

boot with spoiler

drivers door

passengers door

door linings and electrics can be separated along with mirrors

side skirts (one cracked)

windows (remove yourself or get removed properly)

3"catback exhaust with emptied cat and rear cannon

interior lining

parcel shelf

boot lining

boot seal

bonnet latch

horn

ignition barrel with key

radiator

radiator overflow bottle

windscreen wiper bottle

space saver wheel

fuel tank

rear skyline strip between lights

scuff panels inside doors

fuel cap covering panel

windscreen wiper stalk

indicator stalk

steering column

Stil to be removed all rolling gear.

Eg diff,brakes,hubs,suspension,....

Mate no longer needs brakes hubs and handbrake so they're now available

brake master cylinder

front rotors near new

front calipers

rear rotors and calipers

front 5stud hubs

rear 5stud hubs

handbrake

standard diff

rear suspension

front suspension

front steering components

I'm sure I haven't listed a lot of things- don't hesitate to ask

aftermarket rims pictured for sale too- (0419 276 075) mate who owns them

If more pictures are needEd can mms or upload more on request.

Sorry mods-prices added!

Bonnet $250

lhs front gaurd $120

rhs front gaurd $120

front bumper with indicators $120

front bumper reo $100

lhs front headlight $100

rhs front headlight $100

front grille SOLD PENDING PAYMENT

gaurd orange indicators $20 pair

dash with vents $150

center consol $70

dash surround $50

heater/aircon control $40

heater $120

rear seats $150

entire floor carpet $100

roof lining $60

center roof light $20

map lights $20

holy shit handles on roof $10

lhs a pillar $20

speedo cluster $100

glovebox $40

all seatbelts $40

rhs sun visor $20

rear lhs tail light $100

boot with spoiler $280

drivers door $190 with all electrics

passengers door$190 with all electrics

door linings and electrics can be separated along with mirrors

side skirts (one cracked) $50 pair

windows (remove yourself or get removed properly) $$$

3"catback exhaust with emptied cat and rear cannon $350

interior lining $80

parcel shelf $50

boot lining $50

boot seal $25

bonnet latch $35

horn $15

ignition barrel with key $20

radiator $50

radiator overflow bottle $20

windscreen wiper bottle $20

space saver wheel $50

fuel tank $100

rear skyline strip between lights $60

scuff panels inside doors $25 pair

fuel cap covering panel $20

windscreen wiper stalk $15

indicator stalk $15

steering column $30

Stil to be removed all rolling gear.

Eg diff,brakes,hubs,suspension,....

Mate no longer needs brakes hubs and handbrake so they're now available

brake master cylinder $80

front rotors near new $100 pair

front calipers $250 pair

rear rotors and calipers $200

front 5stud hubs $100 pair

rear 5stud hubs $100 pair

handbrake $150

standard diff $200

rear suspension $200

front suspension $200

front steering components also to be removed

I'm sure I haven't listed a lot of things- don't hesitate to ask

aftermarket rims pictured for sale too- (0419 276 075) mate who owns them ask him for price

If more pictures are needEd can mms or upload more on request.

Quiet firm with most prices but that said I Am open to negotiation with prices- have compared with others and have set much the same and cheaper.

For those looking for interstate-I'm happy to send items through post,but larger items please organize freight-I can prepare it but getting quotes etc is a lot of messing around and sometimes worth more than the part.

SMS sent :(

Replied

all pms replied

interstate buyers ( e-go freight seems quiet cheap..google it. A buyer bought boot and spoiler and the freight was very cheap through these guys)

do u have the ashtray

Sorry ashtray is sold-that's the ashtray that sits in th gearstik surround below radio..

I do hve the ashtray that sits in the back of the center consol armrest bit

Other pms replied

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...