Jump to content
SAU Community

Recommended Posts

Hi all

I have the following parts for sale

2 RB26dett engines - $2000 each. Were running when removed but will need rebuild. one needs big end and one needs heads looked at. Not sure on km's of these engines

R32 GTR Gearbox. No problems. Was removed i perfect working order from car with 120k on the clock. - $1000

Full rear end R32 GTR. Hub to Hub with diff and cross member $1200

Full exhaust 3 or 3.5 inch off R32 GTR. May fit GTST but not sure. $400

HKS Intercooler with piping 600x300x100 - $450

Power FC with hand controler R32 GTR - $900

Racaro Seats with rail R32 GTR, should fit most skylines and maybe othe cars - $900pair

HKS T04R single turbo with waste gate and manifold, Used - $1200

My email is [email protected] and contact number 0402 856 276. Items are in Perth.

Link to comment
https://www.sau.com.au/forums/topic/330149-gtr-parts-for-sale-to-make-room/
Share on other sites

some price drops

Engine that needs big end. still $2000 but i can fix big end for $1100 for the buyer after payment add aftermarket turbos (KKR330) for extra 500

Intercooler now 400

rear end now 1000 ono

seats are 900, can email pics if required.

power fc 900

single turbo setup HKS T04r, made 463hp at wheels with stock internals - 1100

Make offers and i will consider it. gotta sell this stuff asap

I can email pics of thing if requested. I not good on computers and dunno how to add pics to the post.

Hey people,

maybe i am asking to much or maybe no one needs parts.

Make offers and they will be considered. I just need to make room and get some cash for my colections, and keep the piece at home :)

i will try to get the photos on tomorrow with some help from a mate. any help on that note would be good.

Hey mate what's the condition of the turbo like? what sizes are the housing's etc water cooled? im not really fimilar with the hks range what was the response like?

Edited by evan b
Hey mate what's the condition of the turbo like? what sizes are the housing's etc water cooled? im not really fimilar with the hks range what was the response like?

Hey buddy,

Very big turbo for making big HP. It was a little laggy but it came on hard by 4500/5000 all the way to 8200. Its in good condition. It was rebuilt just before i got the car by turbotech in redcliff and I had it in for around 20k. I'm not sure bout the housing sizes but i will look tomorrow see if there is info on it. It is oil cooled and comes with the manifold and 63mm HKS gate.

Denver

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...