elysium

pmd

Could you take me off the list, I may not have the car in order now. Apologies for the inconvenience.

can I be down for first non financial member?

cheers for the reply, that one does seem to go into a little more detail than the manual I have. Will give it another go.

Has anyone had experience with one of these tacho's? I've installed it, now trying to setup the cylinders and warning for oil pressure and water temp. It's constantly beeping showing OP on the display, it did this as soon as it got power. I'm taking a guess this is the warning for Oil pressure, I've tested connecting the oil pressure sensor and also have a separate gauge which shows the pressure is fine, but still the warning is going off. I do have the manual and have followed it, but it seems as though it's not accepting the inputs as I'd expect it to. I've also set the cylinders to 6 but it's still showing the revs too high. Is there a way to reset these and start from factory default settings?

Keen as well, last time was fun.

was there much modification required to fit the gtr 5 speed to the vh45?

Can anyone recommend a cheap shop to install some springs for me? front and rear on an e30 bmw?

Prices negotiable

I have the following parts for sale, all have been recently removed from my own gtr (within a couple months) and are in working order. 2x R33 GTR standard turbos with exhaust manifolds - $350 - Turbos never ran more than 11-12 psi as I was the first to install a boost controller. 1x Standard clutch with NISMO flywheel - $300 6x Yellowjacket coil packs approx 9,000km old - $250 - upgraded to splitfires as these started to produce a slight missfire at 320kw 6x Standard RB26 Coil Packs - $200 6x Standard RB26 440cc injectors - $200 Standard GTR fuel pump - $50 Standard GTR Front pipe - $100 - only scrapes on the scuff plates no dents on pipes Standard RB26 Cam gears (in & ex) - $75 Standard Intercooler and piping - $150 - few bent fins, wouldn't affect efficiency Located Sunshine Coast QLD. Prefer text as I am rarely able to take calls during work. 0411219707 Aaron.

I had yellowjackets for a couple years, worked fine on stock power. put in some -5's with supporting mods and started miss firing, must of been close to 300kw. upgraded to splitfires and missfire stopped. now running an easy 320kw without any probs.

This was taken out of my r33 gtr when upgrading the ECU. What would this have been doing if anything and would it be worth trying to offload?

started playing last week on oceanic PVE server imperials add me if you wish - wolffenheisen

i need to get my gtr checked out, been trying to call MW performance but all numbers seem disconnected. Are they still around?

yellow R33 GTR parked at caloundra end of Steve Irwin way. Must work in the area have seen it there pretty often

2 R33 GTR's along nicklin way yesterday, clean looking white one with dark wheels,plates LWR33. And a yellow one cruising past me going the other way, this was around 5pm.

spotted R35 GTR in mountain creek last couple days, one morning entering Mountain creek off Sunny motorway. Today it was coming out of glenfields at about 5.15pm on my way home from work. looked mint.

i got some footage not the best quality though, will post links when i put it up

just found that you can't have more than 20mil credits...scumbags ripped me off about 100k that last race.

I'm a little disappointed with the shadowing, it's almost like GT1 or GT2 shadowing on the PSX. Same on a wet track with the water spray, once it's around the car it looks all pixelated..anyone else notice that?

I did use some timber planks at the old place, was ok for that driveway but not the new one. When I would go up being a gtr the front wheels would kick them out but by that time the lip was already raised so it didn't matter. If i were to dyno bolt them down may as well make it a permanent thing with a metal plate...

i had to use my neighbours driveway to get it in the garage which was a bitch, had to trim trees etc. to get past. Now I can't drive it until I can get it back down lol

anyone know of a good/cheap place to get a decent sized metal plate? i need it for my driveway, just moved house and i can't get the gtr up. you know them curved gutters, its that but seems to be a little higher than the norm. I checked out a metal place in kunda park but they wanted almost 200 for a plate. Can anyone get one on the cheap?

not sure if this has been posted but it looks like its catching on. Linky

This is possible with VMware's Thin App. Basically it allows to you create a portable version of any application you want to. Start off with a clean windows build, run Thin App and it pretty much records the install process and packages it up into a standalone exe (it has sub folders with other required files). But of course this comes with a price - and possibly only available in a bundle with other VM software/licensing...