Jump to content
SAU Community

Recommended Posts

Well surprisingly you have changed my opinion about the body kit and carbon fiber bonnet. 

Couple of questions 

Would it be a smarter idea to buy new coil overs? or is there no real difference with second hand ones (Depending on condition) or would the cost be pretty much the same?

2q9jhpc.jpg

I wanna remove this Orange indicator makes it look like a piece of orange Lego sticking to the car, any suggestions?

bubba-My skyline is permitted for its' coilovers. How would i get that done with my pair when i have purchased them

With the 6000k Head lights where would be the best place to get them from and whats the brand name e.g H4 6000k Xenon Headlight Light Bulbs

Whats a good coil over brand to get

Edited by R33 GTS TURBO
  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Don't you just buy coloured globes and then an opaque white peice of plastic?

Thats what i thought. Would this be in any way illegal? And where would i get the parts from

thx

Edited by R33 GTS TURBO
bubba-My skyline is permitted for its' coilovers. How would i get that done with my pair when i have purchased them

With the 6000k Head lights where would be the best place to get them from and whats the brand name e.g H4 6000k Xenon Headlight Light Bulbs

Whats a good coil over brand to get

Wait till you get a yellow sticker, then fill out the mods paperwork.

As for the HID's (xenons), you need to pop out one of the globes currently in the car so you can confirm the globe type (H1, H4, H7 etc). I just got a set of H1 6000k HID kits for $70 off a forum member (Jembo I think it was).

As far as good coilover brand, I run jap spec Cuscos in my 32, stiff as fk. In the wagon I have a set of Teins.

Go talk to Matt or Brad at WA Suspension and they will point you in the right direction :(

Hey

Sent a message to Brad from Wa Suspensions. Waiting for his reply at the moment.

Also with my HID's is their a place that i could buy them and get them fitted.Want a good job not afraid to spend a bit of $$

Also if any one could offer any info on how to do the above light that would be great.

Thanks for all the help

Well I think its all personal preference. I guess the first question you need to ask is... is this your daily driver? If it is you may want to limit your mods to avoid any unwanted attention, and then Id say the suggestions on here are good.

However, if this is your weekend car and/or youd sacrafice and accept a yellow sticker in return for a hot looking ride then I say go the kit all the way. Nothing sets a car apart and makes it more unique than a kit I reckon.

auto.select.GTR.jpg

Sexy yes?

Guess you also need to ask yourself how much your willing to spend, these things tend to be endless money pits.

In the end just do what ever your heart desires, it is your car, so make it YOUR car.

With second hand coilovers i reckon it depends where you get them from,

If you buy them second hand from someone who has drifted/track work on them then there is a chance they could be

in bad condition, However if you are buying from a reputable Jap store (JPC,KYP, etc) then you will be ok.

so that we stay on topic - i say just coilovers and rims.

if you want jap rims - PM me. ie: PM me for SSR / volk / work / rays / riverside etc

coilovers has been covered, get new if you want new - get 2nd hand if you want second hand

OFF topic - Tritty you said that "these things tend to be endless money pits"... i resent that comment!!! think about it..

you spend what, 36grand on a brand new commodore?? own it for 5 years, it's worth 6 grand. that car has depreciated nearly 30 grand. that car has COST you 30 grand - before taking into consideration the servicing, parts, and (if you go this route) modification

i was thinking the other day, actually. i'm purely addicted to imports. my cefiro has probably cost me about 12 -14 grand in the six years i've owned it. it gets FAR more "street" attention than ANY equally priced new car..

in the "best of both worlds" thread... i worked out a budget of about 25 grand to build a vertex lexus GS300 (keep in mind this is actually a 2000 build lexus gs300 aka jzs160 aristo)

JZS160161GSFCSFULLKIT3.jpg

JZS160161GSFCSFULLKIT4.jpg

~25K budget gets you:

a 2000 lexus gs300

a single turbo convert 2JZ motor from JDM aristo

bodykit

rims

vertex current model GS300 face update.

you get THAT MUCH class

all wrapped up in a ~650HP car.

for ~25K

so to say modifying old cars is a money pit - is a load of rubbish :(

it's FAR more rewarding, fun, exciting and sociable than owning a brand new car =)

on topic - use this post as motivation... yes it's a money pit - but think about how LITTLE you paid for the car... you OWE it some work VS KF!!!

Hey in terms of money, i am not worried with spending much on my car its just you gotta have money to spend :) Gotta wait till i make a bit more $$ before i can start spending up big but i am defiantly going to get new coil-overs. Also haven't installed coil-overs before is it pretty hard or could i just find a guide on line somewhere.

Thanks for the help

It's actually pretty easy getting them in and out if you know what you're doing, there are just tricks you need to learn. Somebody in the tutorial section wrote a really good guide on it, but I've only stumbled on it by accident. If you need help when you've got them, then post on here. At the very least I'd come and do/help you do 'em, but you might even get somebody more spanner handy if you're lucky!

it's eassssssyyyy!!!!!

word of advice though...

take wheels off... undo the tops... (that's easy)

but the side bolts on the shocks can be MEAN to get off

to combat this. spray two quick blasts of WD-40 on the nuts. then go inside. drink a coke. maybe watch some videos of cute cats on youtube. they will come off a lot easier if you do this!

Buy a SAFC and a front mount plus a boost controller, then get it tuned your car will feel 20x better. And if you push your budget out a bit more get some cheap 2nd hand coilies.

And dont listen to Rowan gaying up the thread with his over priced toyota's! :)

Edited by phenline
I've got a better method.

Don't be weak?

Suspension isn't bolted up that tight.

this coming from a fellow cefiro owner?

:nyaanyaa:

speaking first hand. nissan did my stock suspension up nice and tight.... reeeeaaaal nice n tight.

and over the 17 years or so that the suspension was sitting there in my car - it didn't exactly ease up.

also being that the metals used in those bolts and nuts are SO old - the last thing you want to do is twist them off!!! a little bit of lube and some patience goes a long way when removing stock suspension :D

and a heavy friend also helps to get the long buggers out

Ross. you go to Poser Life gym. i'd be careful who you call gay. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...