Jump to content
SAU Community

Recommended Posts

Well surprisingly you have changed my opinion about the body kit and carbon fiber bonnet. 

Couple of questions 

Would it be a smarter idea to buy new coil overs? or is there no real difference with second hand ones (Depending on condition) or would the cost be pretty much the same?

2q9jhpc.jpg

I wanna remove this Orange indicator makes it look like a piece of orange Lego sticking to the car, any suggestions?

bubba-My skyline is permitted for its' coilovers. How would i get that done with my pair when i have purchased them

With the 6000k Head lights where would be the best place to get them from and whats the brand name e.g H4 6000k Xenon Headlight Light Bulbs

Whats a good coil over brand to get

Edited by R33 GTS TURBO
  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Don't you just buy coloured globes and then an opaque white peice of plastic?

Thats what i thought. Would this be in any way illegal? And where would i get the parts from

thx

Edited by R33 GTS TURBO
bubba-My skyline is permitted for its' coilovers. How would i get that done with my pair when i have purchased them

With the 6000k Head lights where would be the best place to get them from and whats the brand name e.g H4 6000k Xenon Headlight Light Bulbs

Whats a good coil over brand to get

Wait till you get a yellow sticker, then fill out the mods paperwork.

As for the HID's (xenons), you need to pop out one of the globes currently in the car so you can confirm the globe type (H1, H4, H7 etc). I just got a set of H1 6000k HID kits for $70 off a forum member (Jembo I think it was).

As far as good coilover brand, I run jap spec Cuscos in my 32, stiff as fk. In the wagon I have a set of Teins.

Go talk to Matt or Brad at WA Suspension and they will point you in the right direction :(

Hey

Sent a message to Brad from Wa Suspensions. Waiting for his reply at the moment.

Also with my HID's is their a place that i could buy them and get them fitted.Want a good job not afraid to spend a bit of $$

Also if any one could offer any info on how to do the above light that would be great.

Thanks for all the help

Well I think its all personal preference. I guess the first question you need to ask is... is this your daily driver? If it is you may want to limit your mods to avoid any unwanted attention, and then Id say the suggestions on here are good.

However, if this is your weekend car and/or youd sacrafice and accept a yellow sticker in return for a hot looking ride then I say go the kit all the way. Nothing sets a car apart and makes it more unique than a kit I reckon.

auto.select.GTR.jpg

Sexy yes?

Guess you also need to ask yourself how much your willing to spend, these things tend to be endless money pits.

In the end just do what ever your heart desires, it is your car, so make it YOUR car.

With second hand coilovers i reckon it depends where you get them from,

If you buy them second hand from someone who has drifted/track work on them then there is a chance they could be

in bad condition, However if you are buying from a reputable Jap store (JPC,KYP, etc) then you will be ok.

so that we stay on topic - i say just coilovers and rims.

if you want jap rims - PM me. ie: PM me for SSR / volk / work / rays / riverside etc

coilovers has been covered, get new if you want new - get 2nd hand if you want second hand

OFF topic - Tritty you said that "these things tend to be endless money pits"... i resent that comment!!! think about it..

you spend what, 36grand on a brand new commodore?? own it for 5 years, it's worth 6 grand. that car has depreciated nearly 30 grand. that car has COST you 30 grand - before taking into consideration the servicing, parts, and (if you go this route) modification

i was thinking the other day, actually. i'm purely addicted to imports. my cefiro has probably cost me about 12 -14 grand in the six years i've owned it. it gets FAR more "street" attention than ANY equally priced new car..

in the "best of both worlds" thread... i worked out a budget of about 25 grand to build a vertex lexus GS300 (keep in mind this is actually a 2000 build lexus gs300 aka jzs160 aristo)

JZS160161GSFCSFULLKIT3.jpg

JZS160161GSFCSFULLKIT4.jpg

~25K budget gets you:

a 2000 lexus gs300

a single turbo convert 2JZ motor from JDM aristo

bodykit

rims

vertex current model GS300 face update.

you get THAT MUCH class

all wrapped up in a ~650HP car.

for ~25K

so to say modifying old cars is a money pit - is a load of rubbish :(

it's FAR more rewarding, fun, exciting and sociable than owning a brand new car =)

on topic - use this post as motivation... yes it's a money pit - but think about how LITTLE you paid for the car... you OWE it some work VS KF!!!

Hey in terms of money, i am not worried with spending much on my car its just you gotta have money to spend :) Gotta wait till i make a bit more $$ before i can start spending up big but i am defiantly going to get new coil-overs. Also haven't installed coil-overs before is it pretty hard or could i just find a guide on line somewhere.

Thanks for the help

It's actually pretty easy getting them in and out if you know what you're doing, there are just tricks you need to learn. Somebody in the tutorial section wrote a really good guide on it, but I've only stumbled on it by accident. If you need help when you've got them, then post on here. At the very least I'd come and do/help you do 'em, but you might even get somebody more spanner handy if you're lucky!

it's eassssssyyyy!!!!!

word of advice though...

take wheels off... undo the tops... (that's easy)

but the side bolts on the shocks can be MEAN to get off

to combat this. spray two quick blasts of WD-40 on the nuts. then go inside. drink a coke. maybe watch some videos of cute cats on youtube. they will come off a lot easier if you do this!

Buy a SAFC and a front mount plus a boost controller, then get it tuned your car will feel 20x better. And if you push your budget out a bit more get some cheap 2nd hand coilies.

And dont listen to Rowan gaying up the thread with his over priced toyota's! :)

Edited by phenline
I've got a better method.

Don't be weak?

Suspension isn't bolted up that tight.

this coming from a fellow cefiro owner?

:nyaanyaa:

speaking first hand. nissan did my stock suspension up nice and tight.... reeeeaaaal nice n tight.

and over the 17 years or so that the suspension was sitting there in my car - it didn't exactly ease up.

also being that the metals used in those bolts and nuts are SO old - the last thing you want to do is twist them off!!! a little bit of lube and some patience goes a long way when removing stock suspension :D

and a heavy friend also helps to get the long buggers out

Ross. you go to Poser Life gym. i'd be careful who you call gay. :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
    • Hi, I have a r32 gtr transmission. Does any of you guys have an idea how much power it will hold with the billet center plate and stock gearset? At what power level and use did yours brake with or without billet plate? Thanks, Oystein Lovik
    • Saw this replica police car based on a Mitsubishi Starion XX parked next to a 'police box' (it's literally a box) in Hirohata, Himeji City in Hyogo prefecture the other day. It's owned by Morii-san who is a local Mitsubishi Starion enthusiast. According to a local radio station blog post, he always wanted to make a police car himself based on ones he saw in his favourite Manga comics.  As it's illegal to modify a car to look like a police car and drive on the road, Morii-san tried many times to get permission from Aboshi police station headquarters nearby. They refused initially by after they got tired of that they granted him permission. However, the car can only be displayed on private property and obviously can't be registered as long as the police livery is present. The car was completed at a cost of 1.5 million yen (US$ 10,000) in addition to the car cost. A location was chosen outside Hirohata Police box where the car can easily been seen from the street. Morii-san has two other Starion road cars, both widebody GSR-VRs.
×
×
  • Create New...