Jump to content
SAU Community

Is My Catch Can Set Up Right?

ClutchBurndout-:(

By ClutchBurndout-:(,
in General Maintenance

 Share

Recommended Posts

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
Posted

hey all, installed a catch can over the weekend, just want to make sure its right, because when i was driving home the other day my car seemed to nearly stall for a second and i thought that i have installed the can wrong. for the record i got a catch can with the air filter, so the engine can breath.

catch.jpg

Link to comment
https://www.sau.com.au/forums/topic/330356-is-my-catch-can-set-up-right/
Share on other sites
blind_elk Grand Master

blind_elk

Posted
Posted
after some research last night i changed my setup, how does this look now?

catch-1.jpg

It's supposed to be a "closed" system. The first option is open to atmosphere, which contributes to the "almost stalling" you encountered.

The second option is the way I have installed mine. But unblock the PCV hose (between valley and plenum).

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
It's supposed to be a "closed" system. The first option is open to atmosphere, which contributes to the "almost stalling" you encountered.

The second option is the way I have installed mine. But unblock the PCV hose (between valley and plenum).

how come i need to unblock the hose? wouldnt this ruin the whole setup? as the fumes would still get into the intake?

blind_elk Grand Master

blind_elk

Posted
Posted

The PCV valve in the plenum only opens under high vacuum, positive pressure jams it shut. The PCV valve is basically only open during "closed throttle", and the minimal amount of oil vapour that might be ingested isn't a problem for the engine.

The problem is when oil fumes are taken from the rocker covers and circulated back through the inlet side of the turbo. The oil (vapour) mixing with the fuel and air severely lowers the effective octane rating of the "fuel", which can cause the mixture to detonate. It won't detonate at effectively idle (throttle closed). The catch can is designed to condense the vapours so they don't reach the inlet side of the turbo.

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
The PCV valve in the plenum only opens under high vacuum, positive pressure jams it shut. The PCV valve is basically only open during "closed throttle", and the minimal amount of oil vapour that might be ingested isn't a problem for the engine.

The problem is when oil fumes are taken from the rocker covers and circulated back through the inlet side of the turbo. The oil (vapour) mixing with the fuel and air severely lowers the effective octane rating of the "fuel", which can cause the mixture to detonate. It won't detonate at effectively idle (throttle closed). The catch can is designed to condense the vapours so they don't reach the inlet side of the turbo.

so if i keep it blocked, whats the cons of that? cos id like to keep even the small amount of fumes out of there... or is there something very wrong with having it blocked?

ta

pipster11 Grand Master

pipster11

Posted
Posted

nissan did lots of research and put the pvc valve there

as did lots of other manufacturers

2nd setup looks right, but unblock the pcv, it does things at idle and light throttle but sfa on boost when your getting the most blowby

get some steel wool and put it in your catch can (making sure that non is gonna come off and go into the turbo)

the fine wool will catch the fine oil droplets, thus making the catch can more effective

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted
nissan did lots of research and put the pvc valve there

as did lots of other manufacturers

2nd setup looks right, but unblock the pcv, it does things at idle and light throttle but sfa on boost when your getting the most blowby

get some steel wool and put it in your catch can (making sure that non is gonna come off and go into the turbo)

the fine wool will catch the fine oil droplets, thus making the catch can more effective

ok cheers, will look into the steel wool, and unblock the pipe, im gonna have to get some new pipe though since theres no way i getting the ball out lol

gotRICE? Veteran

gotRICE?

Posted
Posted

To me it looks like the 2nd pic that you have actually completely sealed off the cam covers from breathing at all.

Without the PCV or the breather to the intake pipe wouldnt the crank case pressure get rather high? As it has nowhere to go.

blind_elk Grand Master

blind_elk

Posted
Posted
To me it looks like the 2nd pic that you have actually completely sealed off the cam covers from breathing at all.
Not at all. The piece marked "PVC line" is the pipe back down to the turbo intake.

Basically all that has happenbed that a can has been inserted between the LHS rocker cover and the turbo intake.

gotRICE? Veteran

gotRICE?

Posted
Posted (edited)

Ahhhh i see! Makes sense now, it just looked like it had a block in it with that grey circle :D If the intake pipe was there, then i would have understood!

And i would have called it differently, as people generally relate "PCV" to the line between the intake cam cover and the IM that actually has the valve in it. The turbo breather hose just has a little brass restrictor :)

Makes complete sense now!

Im thinking of modding my setup due to other issues i encountered, like below. (3rd line closest to radiator is "MS Paint'ed" on.)

Deleted breather filter, and PCV as per factory.

CanPossible.jpg

Edited by gotRICE?
08yannch Rising Star

08yannch

Posted
Posted

i have heard about ppl putting a compressor water separator between the plenum and the rocker cover to filter out oil on that side and a catch can set up (like above) to filter out oil vapor on the other side. maybe something to look into ?

but the second set up look good just remove the ball bearing

ClutchBurndout-:( Grand Master

ClutchBurndout-:(

Posted
  • Author
Posted

why is everyone saying my setup is only venting the LHS valley cover? i have both valleys connected to one hose, then to the catch can, is this correct? both my valleys are going to the catch can correctly?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hi 🙋‍♂️. Just bought my Unicorn but the interior need some minor work so it would match my expectations ;). I noticed it is hard to get used oem floor mats in good condition so i started to dig if there's any chance to buy set of new ones. I found two websites - nengun and amayama and it looks like one can still buy factory new floor mats in Japan, but thers a small issue. Some mats (i assume genuine, oem ones) are marked as G4900 and these are "discontinued". The ones you can buy are marked as G4911 but i have no idea if these are also oem, made by other producer or some lower quality replacements that looks entirely different. Can anyone help? 😃  P.s. there is also some strange indication - 0V005, 0V015 and 0V505. Any idea what does it mean? Would appreciate any help with this 🙏
    • Marek
      Hi everyone.

      By Marek · Posted

      Hi, Marek here 🙋‍♂️. I finally fulfilled my longtime dream - recently bought Stagea and now waiting for it to arrive in Poland. There's only few of these in my country, and one of the owners  recommended mi this forum as a source of all the info i'd need since now i own one  so here i am.  
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Version 1 aluminium airbox is.......not acceptable No pics as I "didn't like the look.....alot" Even after all my "CAD", and measurements, the leg near the fusebox just didn't sit right as it ended up about 10mm long and made the angle of the dangle look wrong, the height was a little short as well, meh, I wasn't that confident that Version 1 was going to be an instant winner I might give Version 2 another go, there's plenty of aluminium at work, but, after having in on and off a few times, and laying in the old OEM airbox without the new pod filter and MAF, there may be an option to modify the OEM air box and still use the Autoexe front cover and filter.... maybe This >  Needs to fit in here, but using the panel, and not the pod, the MAF will need to fit in the airbox though> I'm thinking as the old OEM box and Autoexe cover that is sitting in the shed is just sitting around doing nothing, and they are relatively abundant and cheap to replace if I mess it up and need another, it may well fit with some modifications to how the Autoexe brackets mounts to the rad support, and some dremiling to move it get in there, should give me some more room for activities, as I don't want to move the MAF and affect the tune Sealing the hole it requires to stick it in the air box is simple, a tight fit and some pinch weld will seal it up tight  I am calling this a later problem though
    • Dose Pipe Sutututu
      Ethanol Content Sensor - Always at 11%?

      By Dose Pipe Sutututu · Posted

      and it ends up being already priced in as though you're just on 91RON without any ethanol. Car will lose a bit of economy as the short and long term fuel trims bring down the AFR back to stoich or whatever it is for cruise/idle for the engine.  
    • soviet_merlin
      Ethanol Content Sensor - Always at 11%?

      By soviet_merlin · Posted

      Oh, you are right. But, in Australia E10 is based on 91RON fuel and ends up being 94RON. Hence it being the cheaper option for economy cars. The more performance oriented cars go for the 98RON fuel that has no ethanol mixed in. The only step up we have left then at some petrol stations is E85.
×
×
  • Create New...