Jump to content
SAU Community

Recommended Posts

Hey Guys,

Just decided to try and clean out my garage in hope of fitting a car back in there one of these days. Below are pictures of each of the items; feel free to ask any questions. I can be contacted via PM, I'm on here most days and will generally reply fairly quickly. Feel free to make offers, you never know!

R33 Genuine Nissan Underbody Plastic - First one i've seen - $40

R33 Standard Front and Rear Swaybars (with rubbers) - $40 for both or $25 each

R33 Open 6 Bolt R200 Diff (4.11 Ratio) - $60

R33 Drive Shafts (6 Bolt to suit above diff) - $40 for both

R33 Washer Bottle (unsure if motors work) - $15

R33 Series 2 Passenger Light (needs to be resealed, cover was taken off for cleaning. Plastic cover has small crack, not visible from front.) - $80

Apexi Boost Gauge 60mm (Fake?) - $30

R33 Stock Suspension Front and Rear (Average Condition) - $50 for all of it

Diff Back Exhaust (Good for Compliance) - $40

R33 Standard Dump / Front Pipe - $30

Standard RB25DET Cams - $40

R33 Maroon Boot Lid (No Spoiler, Lock or Hinges) - $30

T Sport Boost Gauge 52mm (All wiring and boost line Included) - $40

R33 Series 1 Manual ECU - $60

6 x R33 Series 2 Coilpacks (All working when removed) - $80

Pod filter Adaptor (Suit Standard afm?) - $15

Custom PWR Radiator (Thick core, looks mint) - $450

Decided to stick with my standard radiator. Side panels make it easy to mount. Comes with Thermo Fan as shown in pictures. Dimensions of the Radiator are 400 High, 550 Wide to Sidetanks, 700 Wide to Panels and around 60 Thick as pictured.

All of the parts can be picked up from the Gold Coast (Robina Area) or I can post at buyers expense.

Mic

post-57177-1280148390_thumb.jpg

post-57177-1280148440_thumb.jpg

post-57177-1280148460_thumb.jpg

post-57177-1280148469_thumb.jpg

post-57177-1280148483_thumb.jpg

post-57177-1280148497_thumb.jpg

post-57177-1280148511_thumb.jpg

post-57177-1280148526_thumb.jpg

post-57177-1280148541_thumb.jpg

post-57177-1280148557_thumb.jpg

post-57177-1280148570_thumb.jpg

post-57177-1280148587_thumb.jpg

post-57177-1280148604_thumb.jpg

post-57177-1280148618_thumb.jpg

post-57177-1280148632_thumb.jpg

post-57177-1280148646_thumb.jpg

post-57177-1280148657_thumb.jpg

post-57177-1280148667_thumb.jpg

post-57177-1280148681_thumb.jpg

post-57177-1280148692_thumb.jpg

post-57177-1280148705_thumb.jpg

post-57177-1280148722_thumb.jpg

post-57177-1280148733_thumb.jpg

post-57177-1280148745_thumb.jpg

post-57177-1280148760_thumb.jpg

post-57177-1280148777_thumb.jpg

post-57177-1280148791_thumb.jpg

post-57177-1280148806_thumb.jpg

post-57177-1280148820_thumb.jpg

post-57177-1280148832_thumb.jpg

post-57177-1280148845_thumb.jpg

Edited by Binofski
can you tell me what the thing in the middle of the right hand side end tank of the radiator is? is it a sensor mount or something? and how much use has it had?

The thing in the middle of the right hand side is just another barb which could be used as a spot for a sensor, or simply left with the rubber bung on it. I've attached some pics to give you a better look at it. It was used by the original owner for a few dyno runs while he was tuning, but he replaced it with a thinner saber one which suited him better. So I would say a few weeks use max. Thing comes up like a mirror after a polish.

Mic

post-57177-1280185211_thumb.jpg

post-57177-1280185232_thumb.jpg

Edited by Binofski
  • 2 weeks later...
ill buy the headlight if u can put the cover on for me?

Hey Mate,

I'll take a look at it today and ill get back to you about it. Gotta see if I have sikaflex to put it back together with.

Mic

  • 4 weeks later...
  • 2 weeks later...

Bump

Also for sale Splitfire coilpacks to suit series 2 RB25DET - $400

Headlight is still here, as is PWR radiator

Apexi Boost Gauge now sold.

Cheers,

Mic

Edited by Binofski
Hey Guys,

Just decided to try and clean out my garage in hope of fitting a car back in there one of these days. Below are pictures of each of the items; feel free to ask any questions. I can be contacted via PM, I'm on here most days and will generally reply fairly quickly. Feel free to make offers, you never know!

R33 Genuine Nissan Underbody Plastic - First one i've seen - $40

R33 Standard Front and Rear Swaybars (with rubbers) - $40 for both or $25 each

R33 Open 6 Bolt R200 Diff (4.11 Ratio) - $60

R33 Drive Shafts (6 Bolt to suit above diff) - $40 for both

R33 Washer Bottle (unsure if motors work) - $15

R33 Series 2 Passenger Light (needs to be resealed, cover was taken off for cleaning. Plastic cover has small crack, not visible from front.) - SOLD SOLD SOLD

Apexi Boost Gauge 60mm (Fake?) - SOLD SOLD SOLD

R33 Stock Suspension Front and Rear (Average Condition) - $50 for all of it

Diff Back Exhaust (Good for Compliance) - $40

R33 Standard Dump / Front Pipe - $30

Standard RB25DET Cams - $40

R33 Maroon Boot Lid (No Spoiler, Lock or Hinges) - $30

T Sport Boost Gauge 52mm (All wiring and boost line Included) - $40

R33 Series 1 Manual ECU - SOLD SOLD SOLD

6 x R33 Series 2 Coilpacks (All working when removed) - $80 - Still HERE!

Pod filter Adaptor (Suit Standard afm?) - SOLD SOLD SOLD

Custom PWR Radiator (Thick core, looks mint) - $450

Decided to stick with my standard radiator. Side panels make it easy to mount. Comes with Thermo Fan as shown in pictures. Dimensions of the Radiator are 400 High, 550 Wide to Sidetanks, 700 Wide to Panels and around 60 Thick as pictured.

All of the parts can be picked up from the Gold Coast (Robina Area) or I can post at buyers expense.

Mic

Series 2 Splitfire Coilpacks - $400 in original Box!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...