Jump to content
SAU Community

Arc Turn Flow Intercooler For Gtst-33

k3vv
 Share

Recommended Posts

k3vv Enthusiast

k3vv

Posted
Posted (edited)

Selling an ARC turn flow intercooler for a GTST R33 Series 1 or 2.

Will not need to cut into body work so you won't risk defects to the car. You only need to shave off abit of the air con fan housing. Bolts on directly

I am selling the intercooler used but in great condition. No bent fins.

PRICE: $700

Location: Toowoomba

Payment: COD, Can post but postage to be paid by buyer. Brisbane / Gold Coast buyers, I can deliver...

Throw me an offer.

Edited by k3vv
k3vv Enthusiast

k3vv

Posted
  • Author
Posted
hey does it come with the bolts n stuff to bolt onto the car

To bolt onto the car, there are 3 points to attach:

1 uses the nut that holds the bonet latch. Undo and attach!!!

2 more at the bottom of the intercooler. Its just a 10 mm nut that will be provided. All the connecting pieces that holds the pipes together are provided.

Buy, plug and play baby

jrm Veteran

jrm

Posted
Posted
You only need to shave off abit of the air con fan housing

Any more details / pics of this?

I've been looking at fitting a Blitz LM FMIC to my car at the moment, and there's no way it's gonna clear the aircon fan housing and I don't feel real comfortable cutting into it.

brad holden Collaborator

brad holden

Posted
Posted
To bolt onto the car, there are 3 points to attach:

1 uses the nut that holds the bonet latch. Undo and attach!!!

2 more at the bottom of the intercooler. Its just a 10 mm nut that will be provided. All the connecting pieces that holds the pipes together are provided.

Buy, plug and play baby

oh yea shit bein that easy to install sounds so temptin but im tryin to get the rest of my exhaust then ill b lookin at somethin like this im tryin to reach the 200kw mark

k3vv Enthusiast

k3vv

Posted
  • Author
Posted

oh yea shit bein that easy to install sounds so temptin but im tryin to get the rest of my exhaust then ill b lookin at somethin like this im tryin to reach the 200kw mark

I am quite confident that this FMIC will be able to carry that amount of power you are trying to achieve, and even more........

JRM Any more details / pics of this?

I've been looking at fitting a Blitz LM FMIC to my car at the moment, and there's no way it's gonna clear the aircon fan housing and I don't feel real comfortable cutting into it.

JRM: I think no matter how you go, you will need to shave off a bit of the housing. What I did to my car was just shave off part of the 'wing' that is sticking out of the fan housing. It won't throw the fan out of whack or anything. The more important bit is that the reo bar does not need much modification or cutting into.... What sort of pics do you want?

To the both of you, check out the link. I have done this myself too and its dead easy.

http://www.skylinesaustralia.com/forums/R3...tml&hl=fmic

PS. check the first pic below item no. 8 and how the bit of air con fan housing needs to be shaved. Thats all in it....

The FMIC I am selling is exactly the same

jrm Veteran

jrm

Posted
Posted
PS. check the first pic below item no. 8 and how the bit of air con fan housing needs to be shaved. Thats all in it....

The FMIC I am selling is exactly the same

Wow. Just wow, okay - I just learnt something.

The R33 fan is *totally* different to the R34 fan. The R34 fan the middle part has a plug and sticks *way* out from the housing - like maybe a good inch out. That's what the FMIC I'm trying to fit is hitting on. If ARC needs trimming on this fan, then I reckon any FMIC would.... bugger! Oh well, there goes my thought that maybe I could get rid of the Blitz and try an ARC :D

k3vv Enthusiast

k3vv

Posted
  • Author
Posted
Wow. Just wow, okay - I just learnt something.

The R33 fan is *totally* different to the R34 fan. The R34 fan the middle part has a plug and sticks *way* out from the housing - like maybe a good inch out. That's what the FMIC I'm trying to fit is hitting on. If ARC needs trimming on this fan, then I reckon any FMIC would.... bugger! Oh well, there goes my thought that maybe I could get rid of the Blitz and try an ARC :)

Like I said mate, throw me an offer. Get it while its hot!!!

It took me 2 days at first because I didn't have all the tools, First time I worked on a car and it took some time to find all the nuts and bolts. But it only took me 3 hours to remove the FMIC.

wasnt me Collaborator

wasnt me

Posted
Posted (edited)
Wow. Just wow, okay - I just learnt something.

The R33 fan is *totally* different to the R34 fan. The R34 fan the middle part has a plug and sticks *way* out from the housing - like maybe a good inch out. That's what the FMIC I'm trying to fit is hitting on. If ARC needs trimming on this fan, then I reckon any FMIC would.... bugger! Oh well, there goes my thought that maybe I could get rid of the Blitz and try an ARC :D

i got a blitz on my R34. didnt have any problems with it clearing the fan. although it is very close.

edit... when you got the kit there should have been 2 brackets for the top of the cooler one for r33 and one for r34

Edited by wasnt me
jrm Veteran

jrm

Posted
Posted
i got a blitz on my R34. didnt have any problems with it clearing the fan. although it is very close.

Did you trim your reo tho?

I've seen a few pics of r33 and r34 now - and their fans seems to be nothing like mine; The motor on my fan sits heaps further out ..

k3vv Enthusiast

k3vv

Posted
  • Author
Posted (edited)

WASNT ME

i got a blitz on my R34. didnt have any problems with it clearing the fan. although it is very close.

edit... when you got the kit there should have been 2 brackets for the top of the cooler one for r33 and one for r34

Reply: I am not sure whether the 33s and 34s have the same principles and I don't doubt you if the blitz doesn't require you trimming anything. ARCs usually have thicker cores isn't it??? As for this particular one that I got, all the brackets are welded to the FMIC. So I am not sure whether it is able to fit a 34

Did you trim your reo tho?

I've seen a few pics of r33 and r34 now - and their fans seems to be nothing like mine; The motor on my fan sits heaps further out ..

Reply: I did trim my reo alittle bit too. Not much, just nip it where the FMIC meets, angle grinder it about 5 mils, and whack the hell out of it to bend that bit of reo. If you ever take the FMIC out like me, just whack that bit back to its original position.

As to your fan, it sounds like an aftermarket type fan?

Again guys, throw me an offer...... I was real happy with it, nothing wrong with this particular one, just want to sell it as I will not be upgrading my car any more.

Edited by k3vv

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Marek
      Hi everyone.

      By Marek · Posted

      Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Marek
      WGNC34 - floor mats

      By Marek · Posted

      Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...