Jump to content
SAU Community

Recommended Posts

looking good mate!

they're actually grenade GX01 rims, not R34 GTR as stated on the last page :D

ah, useful bit of info that one, thanks for that, (i did say replica though :))

The car looks great !! I love what u did with the interior , how hard is the interior to do ? I wouldn't mind trying tha my self ??

Thanks dude, Sadly i have since removed it all since it started to peel up when the interior got hot (im 90% sure its because of the paint on the trim i applied it to) I am now contemplating 1 of 3 options.

1. Coating the trim in Clear a few times and then hitting it with the cf vinyl again in the hopes that the clear will provide a better base to adhere to

2. Stripping it back and re-spraying it in VHT Black Crinkle paint

3. Saving up and replacing the interior piece by piece with real Carbon pieces from Superior Auto Creative

  • 3 weeks later...
  • Replies 161
  • Created
  • Last Reply

Top Posters In This Topic

Again, it looks really good, Stephen. Great work. :thumbsup:

Thanks Victor,

Been set back a touch with doing the retrim on the doors, need to figure out a good way to remove all of the old foam that was under the material, that stuff is stuck on so damn well, metho cleans, but doesnt remove the foam as such.

I'v decided to do this to a side project. how do you join 2 peices properly?

some area's have taken a long time and many re-tries such as mirrors.

I'v stopped caring about little creases and once completely covered will redo them maybe.

my thumbs hurt..

what do you guys charge per hour to do it professionally, I'm not in brisbane though just curious.

Ok guys, bit of an update here,

Finally solved my problem with the foam on the door skins, the best solution was to take the skin off the door, and lay it flat, then with a scuffing pad scrub the crap out of it until the foam eventually all came off (forgot to get pics of it at that stage)

after that, a blade around the edge took off any of the excess bits in the recess.

Also, before i attacked the foam i figure, whilst the door skin is off i might as well wrap the window controls and also the triangles in the corners of the door where most people mount a tweeter.

TRIANGLE

166148_1701772540355_1119203328_1958808_4133662_n.jpg

166148_1701772580356_1119203328_1958809_1923464_n.jpg

PASSENGER WINDOW CONTROLS

166148_1701772620357_1119203328_1958810_2174921_n.jpg

166148_1701772700359_1119203328_1958811_6138713_n.jpg

165629_1701791820837_1119203328_1958874_797380_n.jpg

165629_1701791860838_1119203328_1958875_5354427_n.jpg

165629_1701791740835_1119203328_1958872_3105588_n.jpg

165629_1701791780836_1119203328_1958873_1482880_n.jpg

This is what the drivers door looks like at the moment, with all of the excess foam all over it, Horrible! (will attack this door tonight)

156948_1701804741160_1119203328_1958923_7893230_n.jpg

Then, these (and a scuffing pad that i forgot to include in the pic)

165629_1701791940840_1119203328_1958876_1614292_n.jpg

Added together =

164149_1701804781161_1119203328_1958924_1392835_n.jpg

And all back together retrimmed skin with carbon-ized window trims and triangles

156948_1701804821162_1119203328_1958925_4983739_n.jpg

Stay Tuned!

So putting a little attention towards the interior, :)

post-40562-1284969780_thumb.jpg post-40562-1284969888_thumb.jpg

Also worth noting, the bootlid has been re-glassed, as long as it doesnt crack or have any issues in the next few days, itll be getting primed and paint hopefully during the week, and then wrapped maybe around sunday *fingers crossed*

ive got the carbon fiber dash aswell

i just dont have the ac controls and the vents carbon fiber were can i get that

ive got the carbon fiber dash aswell

i just dont have the ac controls and the vents carbon fiber were can i get that

http://translate.google.com.au/translate?hl=en&sl=ja&u=http://www.superior-cia.com/&ei=tzchTYbGAsrCccjD_bQK&sa=X&oi=translate&ct=result&resnum=1&ved=0CCcQ7gEwAA&prev=/search%3Fq%3Dsuperior%2Bcia%26hl%3Den%26safe%3Doff%26biw%3D1680%26bih%3D860%26prmd%3Divns

These guys do most interior parts in carbon for R34's, a little experimenting will get you to the right section for the parts.

That said, those pics you quoted are what i wrapped in carbon look vinyl, so they aren't real carbon.

Little side project while i haven't been working on the 34

167194_1720121359064_1119203328_2011285_347935_n.jpg

167194_1720121399065_1119203328_2011286_1727446_n.jpg

167194_1720121479067_1119203328_2011288_6511999_n.jpg

http://translate.goo...0%26prmd%3Divns

These guys do most interior parts in carbon for R34's, a little experimenting will get you to the right section for the parts.

That said, those pics you quoted are what i wrapped in carbon look vinyl, so they aren't real carbon.

Little side project while i haven't been working on the 34

ohk so u done the top part with a carbon look a like sticker ?

this is mine ..

167705_10150112424961948_653866947_7453796_5181187_n.jpg

ohk so u done the top part with a carbon look a like sticker ?

this is mine ..

167705_10150112424961948_653866947_7453796_5181187_n.jpg

ah nice, yeah i did the whole lot with carbon vinyl, except the triple gauge cluster.

where did you get your carbon bits from?

ah nice, yeah i did the whole lot with carbon vinyl, except the triple gauge cluster.

where did you get your carbon bits from?

thanks..

i got the car like this

yea i think the gauge cluster would look abit odd carbon wouldnt match the dash

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...