Jump to content
SAU Community

Recommended Posts

Hey all :down:

Just need some parts for my r32 gts-t skyline:

Passenger (Left) Hand side Front bar thingo and frame part aswell (Bolts and nuts to hold it there as i dont have them) (Not sure what its called) lol See picture: Both parts for left side front

so61w5.jpg

2ed4jg1.jpg

Both Front struts have right hand side, but not sure on if its a stock one or not. Just a couple of cheapies! And mounting bolts/Nuts Top and Bottom :)

i20bvq.jpg

2vim2s5.jpg

2iideee.jpg

Last but not least. a cheapo front sway bar with the link pins on the end, or at least the left side as its bent.

Cheers

Contact via pm would be best

or email at [email protected]

Link to comment
https://www.sau.com.au/forums/topic/330667-r32-gts-t-parts-needed/
Share on other sites

i have the tension rod/radius rod and bracket that bolts to the body (1st pic), proberly have the nuts for the tension rod to control arm but no others.

are you looking for the strut or the wish bone and hub (2nd 3rd pics)

where are u located?

why dont you have the nuts and bolts if you removed the parts from the car?

i have the tension rod/radius rod and bracket that bolts to the body (1st pic), proberly have the nuts for the tension rod to control arm but no others.

are you looking for the strut or the wish bone and hub (2nd 3rd pics)

where are u located?

why dont you have the nuts and bolts if you removed the parts from the car?

Hey mate

Reason i dont have the nuts and bolts is because when i brought the car they didn't have them on left hand side. the pics are of the right hand side, just to get the right parts i need.

im looking for the strut. I have the wish bone and hub which it is the left one in pic.

im located in vic mate not far from benalla.

how much you want for the parts?

cheers for the reply

Hey mate

Reason i dont have the nuts and bolts is because when i brought the car they didn't have them on left hand side. the pics are of the right hand side, just to get the right parts i need.

im looking for the strut. I have the wish bone and hub which it is the left one in pic.

im located in vic mate not far from benalla.

how much you want for the parts?

cheers for the reply

Also after a stock rb20det Air flow meter

dont have any struts. no airflow meter.

$50 bucks for the LH version of whats in your 1st pic + postage.

swaybar would be to hard to post i think. im on the sunny coast qld

can buy bolts from nissan or just match them up at a bolt shop using the ones from the RH

dont have any struts. no airflow meter.

$50 bucks for the LH version of whats in your 1st pic + postage.

swaybar would be to hard to post i think. im on the sunny coast qld

can buy bolts from nissan or just match them up at a bolt shop using the ones from the RH

Cheers mate

Could you frieght them down to me all in one package. with the sway bar. Think i found some struts anyways mate.

Also do you have the mountig bolts man? And the link pins for sway bar?

Postage/Frieght would be to Barwite VIC 3722.

Find out a price and let me know.

Cheers

AFM is no biggy as i just want to get the shell rolling. When i picked her up was a pain to get of the trailer :nyaanyaa:

Edited by Nackerz

sway bar has link pins on it and also has D bushes and D bush mount brackets, il have a look for to see what bolts i have. Like i said i dont think i have many off them.

i will have a look for a frieght company cause sway bar is to big to send aus post.

out of curousity how much did you pay for your shell

Pm Sent. Sorry man Can't tell you how much I paid for it. But its only missing a couple little things :/

I use pack & Send they are pretty good and cheap price for frieght, might get one cheaper tho

Edited by Nackerz

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...