Jump to content
SAU Community

Recommended Posts

ok i'll start my thread from here

im looking to start working at the mines, but im currently living in victoria

iv been a bricklayer for the past 7 years, but the pay isnt that great

now iv been doing a fair bit of research, trying to get as much info as possible

i would like to FLFO (fly in fly out) dont no exactly how it works...

it would be very helpful from guys that have had first hand experience

thx guys

easiest way is to either get a HR license and possibly get in a trainee dumpy position...

other than that dude you gotta start low like field technician/assistant, core farm tech, process technician, geotech...

there are tafe courses you can do for some of them... but if you know anyone at ALL in a mine find your hook ups man, once you get in it's all good :)

other tickets like Working at HEights, Elevated work platform, Confined space, forklift, dogging, rigging and even scaffolding will make it easier for you to get in. HR is a pre requisite on some sites

The more tickets the better then contact places like extraman or skilled, ready work force etc and be persistent a lot of companies wont fly you from over east so be prepared to re locate or pay your own way home also look at oil and gas construction heaps of that stuff going on i used to work in the mines but now work on the rigs try rigzone website, offshore marine services, total marine services, GRN SWG there are heaps just net it up and be persistent. most labor hire places clean thier boout after 3 months so just keep hassling then and they will give u a job just so u will leave them alone

good luck

  • 2 weeks later...
  • 2 weeks later...

I work FIFO in underground mining, the easiest way to get a job that is unskilled ie non tradie/graduate is to start off as a truckie or a nipper and then work your way up the ladder, companies like barminco, byrnecut etc are always in need of truckies or nippers so drop you resume in and see how you go, and yes it is a case of fit in or f**k off

Cheers Nick

  • 2 months later...
What's the deal with IT up in mines? Do they have many FIFO jobs in IT?

- intrigued, but not enough to send my CV in...

Epic thread revival time.

Didn't want to start a new thread so I thought I'd post here.

Working in IT in QLD at the moment and two close friends are moving back to WA and have been trying to get me to go over with them. Wondering if anyone here is a part of the office side of things and knows a bit about the IT structure over there and whats needed to get in.

My friends have worked as drillers there beforehand so they figure it will be simple for them to get a job.

Any help is appreciated.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...