Jump to content
SAU Community

Recommended Posts

With the injectors, you might want to go with new injector seats (as you don't know the condition of the existing ones until they're off) like here, not sure about the upper seats though: http://justjap.com/store/product.php?produ...at=0&page=1

I've got Sard 700cc injectors as well (still boxed), but the research I found told me they can be squeezed into the stock GTR rail (even Shaun @ Boostworx told me he has fit them before to the stock rail with abit of oil, even the Sard 800cc's)

I'd add a new genuine fuel filter to the list.

Yhy the Sard fuel pump though? I would personally go with the Nismo intank.

Look on nengun, you need collars for SARD injectors in a RB26 rail.

If not, it's RB25 one... can't remember.

But it's a supplement part (about $100?), hence SARD list price is generally cheap than Nismo etc as you need to get the collars to seat injectors.

whats this high and low impeidence biz huh?

Depending on your ECU, you might need one or the other.

What ECU you running again?

If you are going to replace the rail, you might want a Sard rail to go with the injectors. This means you probably wont need collars???

yep ive got the tomei rail

and ill be running the new haltech plug in and ditching the afms

the injectors in my case wont need collars

and an injector guy just explained low impeidence and resistors to me so i have a few choices

for high impeidence you need to remove the resistor thingy

Hey Jase, my mechanic can supply new o-rings (injectors don't usually come with them, always a good idea to use new ones) for a decent price. I'm running 700cc sards and they fit factory, got a bosch 044 external fed by standard in-tank, 540hp atw. Where are you heading power wise? Any fuel mods you do now might as well take into account where you want to end up power wise.

Hey Jase, my mechanic can supply new o-rings (injectors don't usually come with them, always a good idea to use new ones) for a decent price. I'm running 700cc sards and they fit factory, got a bosch 044 external fed by standard in-tank, 540hp atw. Where are you heading power wise? Any fuel mods you do now might as well take into account where you want to end up power wise.

Cool i will hit you up

hey man pop over and chat one day

im in greenslopes now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...