Jump to content
SAU Community

Recommended Posts

Hi SAUers,

i have a few small issues with my gtr thats been bugging me. the engine is making a ticking noise which appears to be near the top end. it's very annoying and can be heard all the time. it doesn't sound that bad but still annoying. also when driving anything below 2500 revs. ticking can be heard. not ridiculously loud but very obvious anything below 3rd gear. noisy injectors? lifters? screwed crackshaft? dying valve?? timing?

heres an audio clip

97 r33 gtr

117,000 kms

Thanks

Edited by 97/V-Spec
Link to comment
https://www.sau.com.au/forums/topic/331847-r33-gtr/
Share on other sites

Look I'm not 100% sure but I also have a 97 series 3, and it sounds very similar to mine. As far as I know all GTRs are known for having a loud ticking sound coming from the injectors, this is normal. Maybe someone who knows more than me might say different, but I'd say its nothing to worry about.

Link to comment
https://www.sau.com.au/forums/topic/331847-r33-gtr/#findComment-5385630
Share on other sites

Look I'm not 100% sure but I also have a 97 series 3, and it sounds very similar to mine. As far as I know all GTRs are known for having a loud ticking sound coming from the injectors, this is normal. Maybe someone who knows more than me might say different, but I'd say its nothing to worry about.

hi there. yeah initially i also thought it was normal among gtrs but at the same time was 100% so i just wanna check with other r33 owners.

anyone else can confirm this? if it's injector, would switching to aftermarket like nismo help remedy the tappet noise?

Link to comment
https://www.sau.com.au/forums/topic/331847-r33-gtr/#findComment-5387176
Share on other sites

hi there. yeah initially i also thought it was normal among gtrs but at the same time was 100% so i just wanna check with other r33 owners.

anyone else can confirm this? if it's injector, would switching to aftermarket like nismo help remedy the tappet noise?

Nope, I have Nismo 555cc injectors and it makes the same noise. Although I have changed back to the standard injectors and I think they make a litttle more noise, but not by much.

Link to comment
https://www.sau.com.au/forums/topic/331847-r33-gtr/#findComment-5387595
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...